Project Pics (was It's Looking Good)
 

Well i got a thread going in the South fourm, but i wanted a little more traffic on some of these pictures of my project.


I am allmost done!!!!

Tell me what you think so far.

http://i19.photobucket.com/albums/b1...d/Stuff557.jpg
http://i19.photobucket.com/albums/b1...d/Stuff590.jpg
http://i19.photobucket.com/albums/b1...d/Stuff589.jpg
http://i19.photobucket.com/albums/b1...d/Stuff578.jpg
http://i19.photobucket.com/albums/b1...d/Stuff576.jpg
http://i19.photobucket.com/albums/b1...d/Stuff560.jpg
http://i19.photobucket.com/albums/b1...d/Stuff556.jpg
http://i19.photobucket.com/albums/b1...d/Stuff536.jpg

What turbo is that? Looks abit strange.

Do you have a thermostat for those oil coolers (dont want too cold of oil)?

Looks pretty interesting so far!

wow looks great! good luck, cant wait to see more pics!

If you go to the south forum it is under ( Finally Started my own project) there is about 100-200pics. And under the Rotary Tech section there is a thread (Noob's guide to porting) that shows the engine porting

I have a oil thermo coming, but it is just going to be like this to start it and check stuff out.

I have talk to a few people running without them in the south, but i will install mine sooner than later.

The turbo is a T6, and close to a GT42 on the compressor side and a little bigger on the exhuast, it maybe to big on the exhuast side, if it is no big deal I will just find one smaller. This turbo was given to me for free and it is BRAND NEW

Next thing to install is the Electric water pump

pretty nice man. that's considered an h-mount right?

Maybe!..... I call it Chuck Style

New steering rack boots I got mine for 30~ bucks each from Ray.

Nice bumper Origin?

I think you need a bigger turbo!!

Front Bumprer fromt Ebay, 150 dollars + 100 Shipping

Someone told me i need more cooling, LOL I am running a EWP with Evans NPG-R @ 0psi

I have had a coolant o-ring problem before and when i started this project, i told myself i would never have a coolant problem ever agian

Looks good, i'll have to find the other thread. Good luck!

Here is the link to the main thread on this project, just to help you guys

https://www.rx7club.com/showthread.p...1&page=1&pp=15

:icon_tup: :icon_tup: :icon_tup:

looking good. What oil cooler set up is that?

Wow, looking good. That front end is going to be mean!!!!

I built it from the ground up, there isnt a kit exactly like this. But there are some out there, they are all in the 650-800 range

I payed 500 for all the parts to do this setup from summitracing.

There are updates on the main thread :)

More Updates in the main thread.