RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   problem !!!! (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/problem-323761/)

Rx-7pl Jul 2, 2004 11:49 PM

problem !!!!
 
ok so I did a fmic and koyo radi vert installed, and i refill coolant start the car, i had to extend the cables from fans cause of the fmic custom pipes. I drive a car for about 5 minutesa and after the fans should turn on, first car won't pass 3k and then stalls after five minutes.
and i cannnot start it with fan cables plugged in, i have to disconnect cables to get it start it again. If i don't unpluge the cables from the fans i hear some clicking when i turn my key on from.
please help

Fatman0203 Jul 3, 2004 12:08 AM

Limp mode. Disconnect the battery and pump the brake for 30 seconds. See if that works, take it easy at first.

Rx-7pl Jul 3, 2004 12:15 AM

ok i do it toomorow

rotarypower101 Jul 3, 2004 12:46 AM


Originally posted by Fatman0203
Limp mode. Disconnect the battery and pump the brake for 30 seconds. See if that works, take it easy at first.
If you are trying to get him to reset the stock ecu, I think you have to disconnect the negative terminal and hold the brake pedal down for 30 seconds

Fatman0203 Jul 3, 2004 01:33 AM


Originally posted by rotarypower101
If you are trying to get him to reset the stock ecu, I think you have to disconnect the negative terminal and hold the brake pedal down for 30 seconds
Ok there you go, I know some cars you have to disconnect both (dont know why) and some is pump some is hold.


All times are GMT -5. The time now is 06:08 AM.


© 2026 MH Sub I, LLC dba Internet Brands