Pressure chamber in way installing KGparts sec rail
 

For those still running twins on your FD with aftermarket sec rail, FPR,and gauge. These things should mount where the pressure chamber is located, I tried searching but no luck. What did you guys do about this. post pics if possible

^^^^^
anyone I know plenty of guys have done this please chime in.

You can mount the FPR and gauge elsewhere, like near the driver's side shock tower.

My good friend had 1680cc sec's with seq BNRs, so it can be done. The big problem is the ACV with the rail, but who the hell wants to run an airpump anyway :D?

Forgot to mention but I already removed the airpump so that will not be a problem, where exactly is the ACV located? I guess I can just block this off right? The problem with relocating the FPR and gauge is that I ordered a KGparts kit and I will not have sufficient fuel hose to reach shock tower. Any other suggestions. Is the pressure chamber absolutely necessary can I just block off the vaccum nipples?

Only if you like to get full boost above 4500rpm.

with the airpump out of the way, you should have room somewhere to put the pressure chamber.

dont worry, you have enough, I took care of it before it was shipped. ;)

thanks a bunch bro, I really appreciate all your help, I will try and remove my primary rail this week and ship it to you.
-William

yeah that is where I was planning on relocating it.