Power Steering Banjo Bolt Size?
 

I'm making a line for my power steering to steering rack but I don't know what size adapter i'll need for the Actual power steering unit. Does anyone know what size it is? Thanks much in advance guys!:icon_tup:

- Ap

No one?

Best bet is to take it to a some place that does hydraulic lines.

I had Oil Filter Service build a line for my FD - I looked for the receipt (with part#) but can't locate it.

If you can get the measurements of the fitting, give these guys a call.

Just went out to the garage and checked, my pump is off the car while I'm upgrading the intercooler :)

It's 14mm x 1.5. Don't know if you need the length of it, if you're doing AN fittings just get a 14mm x 1.5 banjo and you should be in good shape.

Dale

Dale..I owe you one!! Thanks much!

Looks like I might need to do the same as well. One question, my P/S pump came with these lines. Its orginally from a Jspec motor. From a few threads Its suppose to be a banjo bolt on both sides of the lines? Also my rack is just a open hole it looks like, anyone know what size the fitting is for the rack side?

Thanks Dale!
Attachment 685604
Attachment 685605
Attachment 685606

finished product!
Attachment 685607