RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Power??? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/power-294417/)

Fred Villamor 04-13-04 08:54 PM

Power???
 
Iv'e recently finished a wave of mods to my 93 RX7 and I was curious as to how much HP I am getting ?? (ballpark guesstimate???) Power Fc & commander , M2 downpipe , RX7 store resonated midpipe , Apexi N-1 cat back , full blockplate kit , Non-sequential conversion (parallel turbos) , removal of airpump and ratsnest (solenoids) , hardpipe intake with KNN filters , Rotary Performance stage 2 clutch kit , Approx. 11lbs of boost ( right now ) Does anyone have an estimate on HP from some comparably modded cars ?? Also , I just got a set of 1300 cc injectors to put in the 2ndary rail and I got an RX7store primary rail to fit my 850s into , with the Nippondenso fuel pump upgrade , that hasn't been installed yet . Anyone have an idea of HP w/out the fuel pump and injector installation ?? I don't have a Dyno anywhere near me to find out for sure . Thanks for any help any of you may have...Cya

fastcarfreak 04-13-04 10:02 PM

i would say about 50+ to the wheels for everything. Your gonna feel a huge difference in your car man. get it tuned though.

Fred Villamor 04-13-04 11:11 PM

50 + , is that it ? DAMNNNN!! I was hoping for more than that with all the $$$ spent on this stuff. What about tuning ? Are you talking about Datalogging , or what else ? Thanks FV

Fred Villamor 04-13-04 11:16 PM

We had a couple of boost runs when first dialing the boost pressure where we reached 14 +psi and hit a fuel cut , so we increased the rev limiter to like 10,000 rpms and dialed the boost down to 11psi to start with. It was such a noticable difference that I was way happy with the way it felt so I left it there (11psi) . If I increase it back to 14psi , approx. how much HP would you guesstimate then ?? Thanks again FV

PVerdieck 04-13-04 11:56 PM

What you have is a lot of potential, and not much else.

What you need is a good tuning. By someone that knows a PFC. You need to head to Pettit, and have them tune it, or something like that.

You have made a serious bunch of mods to your machine, but without someone to properly tune it, you don't have the complete package.

You should be 350-375 when tuned, or thereabouts with that setup. But you won't see it until....

TAMAatWork 04-14-04 12:01 AM

No intercooler?

-Joseph

Fred Villamor 04-14-04 08:24 AM

FMIC is the next piece , I got a new radiator already , but can,t fit it in stock location until I get the front mount ...2 * 1/16th inch core !! Is the tuning done with the datalogit? Thanks for all the help guys...FV

1QWIK7 04-14-04 08:56 AM

yeah bout 50 to the wheels sounds somewhat correct, remember thats to the wheels!!

def get it tuned though, otherwise those extra 50 horses will feel like sh*t..

P'cola FD 04-14-04 09:19 AM

Fred, since you're in Pensacola, do you know Rodney? He works at V&T Performance. He's tuned his PFC for his T04R with the dataloggit he has. He may be willing to tune your car in his spare time for some cheddar. PM me if you want his number.

Fred Villamor 04-14-04 11:56 AM

I know Rodney , he's alredy done some work for me. I thought about him ,


All times are GMT -5. The time now is 05:54 PM.


© 2024 MH Sub I, LLC dba Internet Brands