3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

please help

Thread Tools
 
Search this Thread
 
Old Jul 27, 2005 | 12:04 AM
  #1  
fe.castillo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 8
Likes: 0
From: santiago of chile
please help

my car is a fd3s , the engine is japanese but the car is american version , i need help because i dont now why my car is lost power on 3000 revolutions , it is the same when it remains without gasoline , a noise of the motor is listened to.
please help my , if you now what is the problem
Reply
Old Jul 27, 2005 | 12:18 AM
  #2  
chinoflyer's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Apr 2005
Posts: 159
Likes: 0
From: VA
boost leak maybe??
check all your air hoses.
Reply
Old Jul 27, 2005 | 12:42 AM
  #3  
JConn2299's Avatar
reliable performance
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 383
Likes: 1
From: MA, USA
Or is he referring to the 3,000 rpm hesitation? Use the search function of this forum to look for "hesitation" or "3,000 rpm hesitation". If that sounds like your problem, then you will find many suggestions for how to deal with this problem including the use of an improved grounding strap.
Reply
Old Jul 27, 2005 | 11:43 AM
  #4  
fe.castillo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 8
Likes: 0
From: santiago of chile
ok thank you very much
it will review it
Reply
Old Jul 27, 2005 | 11:49 AM
  #5  
fe.castillo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 8
Likes: 0
From: santiago of chile
I forget to me ,my car has a domwpipe gredy 3,5" and line of escape in 3 ", this can have relation? thanks to answer it will wait for its answer,
excuse my ingles
Reply
Old Jul 27, 2005 | 12:34 PM
  #6  
fe.castillo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 8
Likes: 0
From: santiago of chile
thaks for the informatiom , but the problem of my car is much more than a hesitation , over 3000rpm it does not have power ,almost it does not even walk and with a noise

remember that I change the engine, and I put japanese to him,

my mecanic says to me that is for the engine harnees is bad ?

what do you think?
Reply
Old Jul 27, 2005 | 12:42 PM
  #7  
KevinW's Avatar
Senior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2004
Posts: 494
Likes: 0
From: Austin, TX
i have a 97 jap motor that was just put in and it runs just fine, it has nothing to do with the motor being from japan.
Reply
Old Jul 27, 2005 | 01:29 PM
  #8  
fe.castillo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 8
Likes: 0
From: santiago of chile
ok , it did not have to make modifications?

I saw in post information on differences of the engine japanese and the American,
the differences
Reply
Old Jul 27, 2005 | 01:30 PM
  #9  
fe.castillo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 8
Likes: 0
From: santiago of chile
but the engine runs with the jap harness?
Reply
Old Jul 27, 2005 | 07:41 PM
  #10  
fe.castillo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 8
Likes: 0
From: santiago of chile
i think , the problem is the engine harness , in special the in ectors
Reply
Old Jul 27, 2005 | 08:08 PM
  #11  
Xearo_FD3S's Avatar
I know, youre sorry...
Tenured Member 05 Years
 
Joined: Jan 2005
Posts: 166
Likes: 0
From: Sacramento
ouch this thread hurts to read
Reply




All times are GMT -5. The time now is 05:07 AM.