Pic of Scoot Hood on my FD
|
that hood is such a piece of work. i have been looking at it for some time now, but was worried about the fitment. how is it? and..is that the fbg replica or the real deal?
one more question......do the blocking plates for the louvres attach to the hood itself, or do they like slide in or out w/o using some type of fastener? looks good....they weren't lying when they said that there can be no strut bar with that hood.. louis |
Originally posted by R Xplicit that hood is such a piece of work. i have been looking at it for some time now, but was worried about the fitment. how is it? and..is that the fbg replica or the real deal? one more question......do the blocking plates for the louvres attach to the hood itself, or do they like slide in or out w/o using some type of fastener? looks good....they weren't lying when they said that there can be no strut bar with that hood.. louis |
cool! who/where was your source for the hoods? i have seen it on a few sites, but am worried about the shipping, as the guys that we get cf hoods from are shitty shippers...
-thanks louis |
Originally posted by R Xplicit cool! who/where was your source for the hoods? i have seen it on a few sites, but am worried about the shipping, as the guys that we get cf hoods from are shitty shippers... -thanks louis |
nice very nice!! But i notice the gap in the front is alittle noticeable. other than that, the hood is perfect.
|
Looks sexual.
|
Originally posted by 417RX7 Looks sexual. |
very nice, i love that hood
|
Nice hood, always loved it.
|
Sorry to say GUYS..
That hood is UGLY.. TO me the HOOD makes the RX7 look like a Toyota Celica.. Sorry just my Opinion. Only hood to go with a FD3 is a Mazdaspeed/replica.. |
Originally posted by stevecod nice very nice!! But i notice the gap in the front is alittle noticeable. other than that, the hood is perfect. |
does that gap between the hood and bumper count as an intake too??
and it doesnt look like the bumper is sagging. the gap between the bumper and headlights looks very small/normal. |
I've been looking for that thing....haven't been able to grate my cheese for a while. ;)
Post pix when it's painted. |
i like the fact that everyone has opinions, and freely share them...that is cool. but have you all noticed that every picture that is posted, whether it be a forum member's car, or even an unknown rx7, someone always talks shit about the gap at the front of the hood. or hey, your bumper is sagging. 99 out of 100 pics get this comment...well, guess what.....that gets old. you may not have noticed, but there is no hood latch installed. maybe there won't be, that is ok.......it just bugs me that everyone always says something about a gap here or there. well, none of these cars are perfect.....they all have imperfections.
sorry to bitch, that has just always bugged me....and by no means is this post intended for anyone in particular..... -louis |
I can honestly say that the scoot cf hood is for sure my fave hood of all time. It's an amazingly beautiful piece of craftsmanship and definetially doesn't distract from the car. That's assuming that its a reeal dark color in the first place :P.
|
I love that hood soooo much. Just looking at it gives me this squishy feeling inside.
|
Originally posted by R Xplicit i like the fact that everyone has opinions, and freely share them...that is cool. but have you all noticed that every picture that is posted, whether it be a forum member's car, or even an unknown rx7, someone always talks shit about the gap at the front of the hood. or hey, your bumper is sagging. 99 out of 100 pics get this comment...well, guess what.....that gets old. you may not have noticed, but there is no hood latch installed. maybe there won't be, that is ok.......it just bugs me that everyone always says something about a gap here or there. well, none of these cars are perfect.....they all have imperfections. sorry to bitch, that has just always bugged me....and by no means is this post intended for anyone in particular..... -louis |
I didn't have a hood latch when the hood was closed so that's why it's sligtly up. BTW my bumper is NOT sagging.:mad:
|
Originally posted by WhiteRXseven Sorry to say GUYS.. That hood is UGLY.. TO me the HOOD makes the RX7 look like a Toyota Celica.. Sorry just my Opinion. Only hood to go with a FD3 is a Mazdaspeed/replica.. |
Originally posted by ThirdGenRX7 i was lookin at one of the pics and I think that might be caused by his bumper sagging in the front a little bit.. if you look around the headlights you can see the gap increasing |
boooo
I have the best taste ever and sorry it's not workin on this hood Try this one: https://www.rx7club.com/photo/index.php?photo=2978 ;) No seriosly there is this other one that I saw on a black FD where I was reading some tech info and it had a cool hood that the guy just got and it looked awesome try that one -Snook |
|
Originally posted by RX7 RAGE well i don't give a fuck about your opinion now do i? oh yeah...i think your knockoff hood is ugly. well, i think the real Scoot hood is ugly too. JUST MY OPINION! also, why does it say "Scoot hood" in your sig and in the subject title, when in fact it is NOT a Scoot hood?? |
Originally posted by ThirdGenRX7 i was lookin at one of the pics and I think that might be caused by his bumper sagging in the front a little bit.. if you look around the headlights you can see the gap increasing |
The bumper isn't sagging, there's just an extraordinarly large gap at the front of the hood, which I'd expect from a knock-off part. And I'm going to have to agree with JoeD... that hood looks like freeze dried ass, especially on an otherwise stock appearing car.
RX7 RAGE, if you don't like my opinion, that's fine. You posted the pictures to show off, and you have to expect that some of the comments you'll get aren't going to be positive. That's life. If you have such thin skin that you can't deal with some criticism, then you probably shouldn't post at all. |
Answer!!! About gap
Guys that hood fits great. That is a scoot replica hood that chuck (Rotary Extreme) is doing for some of the guys(including my CF version) in the forum as a group buy. Their is a gap in the front because their is no latch yet for the hood. You could see in the second pic that the latch is missing, it is not finished yet. This hood fits better than the original Hood that cost like 2000+ big ones. The gap will be non-existant when the latch is added and Hood completed. By the way Rx7 Rage, The Car looks great with the hood......post pics when finished getting it painted.:D
|
Originally posted by jimlab The bumper isn't sagging, there's just an extraordinarly large gap at the front of the hood, which I'd expect from a knock-off part. And I'm going to have to agree with JoeD... that hood looks like freeze dried ass, especially on an otherwise stock appearing car. RX7 RAGE, if you don't like my opinion, that's fine. You posted the pictures to show off, and you have to expect that some of the comments you'll get aren't going to be positive. That's life. If you have such thin skin that you can't deal with some criticism, then you probably shouldn't post at all. |
ATIHUN: HELL Yeah that is the one that I'm talking about
it was on another black car that didn't have the New front bumper and it still looked sweet as fuck!! Yeah that hood is just scary I'd get that one for sure I'm out like a trout cause I'm strait like a gait -Snook |
Originally posted by RX7 RAGE Jimlab, the reason for the gap is because there is no hood latch yet. |
I like the hood. Although like many of you stated here it does not go very well on a stock bodied car. I think you really need full body kit to make it work, since its such a wild and agressive hood. As far as copies are concern, I have had both real kits and copies on my car and I can tell you real kits arent always as good as you think, most of the time they are made with very thin amounts of fiberglass to save weight and can crack very easily. Depending who manafactures the copies, they can be even better then the real thing.
|
Seems like the CF will come soon. :D
|
Nice hood. I think Chuck did a very well job correcting the fitment from the original. I like both the scoot and the mazdaspeed hoods. Here's a nice one!
http://members.cox.net/tranh/cwest/DSCN1069 http://members.cox.net/tranh/cwest/DSCN1102 |
bucrx7, you got some pics of the girl sitting inside? :D
well, I like the scoot hood better than the Mazdaspeed's |
Man i wish my Mazdaspeed CF replica looked like the one on the yellow car. Mine looks like "freeze dried ass" as stated so perfectly before. It has pits and waves and the line around the passenger light has to be trimmed ALOT to fit my RE lights. It's going to be painted now anyway so i guess it really doesn't matter too much.....oh and the framing is breaking off from the main body underneath and the latch is also breaking apart.:mad:
Other than that i'm really satisfied with the "knockoff" hood that i purchased:bash: |
So basically since there is no latch and only hood pins for this replica...there is no lock on the hood.
Basically if you go down to 7-11 someone can just open up your hood when you are not there. |
Originally posted by JoeD also, why does it say "Scoot hood" in your sig and in the subject title, when in fact it is NOT a Scoot hood?? You'll turn this into "Whether I have an rx7 or not is not the point because I can surely afford one I am just looking for the right one..." Personally I just think it's hypocritical for someone who no Japanese Aero Parts on his rx7 nor a rx7 in the first place(for whatever reason it may be) to be cutting people down 24/7 for having "Knock-off" or dare I say "REPLICA":D aero parts on their car. That is my opinion.;) BTW, it does look like it's not sitting right and may be because of the latch. But from the pictures I saw of the fitment quality of the original this is tons better. |
Originally posted by RotaryKnight So basically since there is no latch and only hood pins for this replica...there is no lock on the hood. Basically if you go down to 7-11 someone can just open up your hood when you are not there. |
ahahh yea gene but i'm more worried with people messin with your car
|
Originally posted by RotaryKnight ahahh yea gene but i'm more worried with people messin with your car |
sweet hood...i wouldnt mind having one
|
If you are worried about not having a latch and people opening your hood, just get some hood pins that use a key to unlock them. Looks like your fitment is good, once you latch it down better and paint it, that gap won't even be noticable.
As far as knockoff, replica, or whatever.....there isn't anything wrong with trying to save a few bucks by taking a chance on quality. As time has gone by these replica hoods have gotten much better. I've seen some really crappy looking replica hoods, but here of late I have seen some very good work. I recently bought a faspac hood (similar to the mazdaspeed style), knowing that many didn't like the quality. But I took a chance, bought 2 dollars worth of bondo, and had it painted, sold my old hood for what it cost to get it painted, and ended up with a great looking hood for not much money. Just my 2 cents on the subject. |
rx7rage, i think the hood looks great, and im sure it'll look even better when you get the hood latch on and painted. people wanna bitch because they are jealous and/or your mod list might be a little longer than theirs, just tell them to shove it. some people here really need to chill out.
|
~
That is a nice job on the Scoot hood, not my taste but well replicated.
Here is the knockoff carbon fiber MazdaSpeed Replica hoods we have. It uses the stock latch. http://www.atihun.com/pictures/mazda/cfhoodfront.jpg Here's some more pictures: Pics Here Knockoff or not, the fit is excellent, and worth the $1300 in savings. Oh, and did you see the original Scoot hood for $2200? What a piece of crap. Also, our MazdaSpeed Replica hood you see was just bolted on with no fitting. It also has NO clearcoat on it yet. ~Attila~ |
Guys, please read all the post before you comment. it has been said plenty of times already that he IS getting a hood latch. so no stealing parts, and it will fit better. as far as fitment, the replica hood fits better, much better, then the original.
|
ok mom.
|
LOL thanks for making things nice and clear Elizer.
How will getting a hood latch make that 1/4 inch gap in the front of your hood go away? And to everybody else... shit look at how much this guy saved by getting a knockoff, what's the acual scoot hood cost to get in the us? 2400 or some crazy shit. so for a grand less wouldn't you use a little body filler and smooth everything out and save yourself a grand so you can buy some engine mods?? Seriously, for as cheap as it is I am suprized at the quality. Nick |
Anyone know when they're going to make a knock-off of this hood?
http://www.rotaryextreme.com/tokyo/regtsilver1.jpg |
THEY never should make a knock-off of that hood..
Its not RE just because it looks like it....Plus that body kit its out yet//// |
Originally posted by NickSimcheck LOL thanks for making things nice and clear Elizer. How will getting a hood latch make that 1/4 inch gap in the front of your hood go away? And to everybody else... shit look at how much this guy saved by getting a knockoff, what's the acual scoot hood cost to get in the us? 2400 or some crazy shit. so for a grand less wouldn't you use a little body filler and smooth everything out and save yourself a grand so you can buy some engine mods?? Seriously, for as cheap as it is I am suprized at the quality. Nick |
All times are GMT -5. The time now is 03:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands