RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   personal survey (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/personal-survey-204186/)

mcfly4001 07-10-03 11:22 AM

personal survey
 
has anyone had a problem with their car, that when u rev it up, the check engine light will blink on, the car sputters and than the light goes off by the time it reaches idle?

if so, what was it?

if u found out what is was, how did u fix it?

thanks

mcfly4001 07-10-03 12:20 PM

bump

SanJoRX7 07-10-03 12:29 PM

I've seen it once and only once in my FD. Dunno what it was...presuming it was momentary detonation or something.

mcfly4001 07-10-03 12:30 PM

hmmm, thanks sanjorx7, thats a start, anyone else?

n/arotary 07-10-03 02:13 PM

Have you checked to see what the check engine code is?

http://www.scuderiaciriani.com/rx7/engine_codes.html

mcfly4001 07-10-03 02:20 PM

hey, n/arotary, yeah i know all the check engine codes, practically got them memorized, but my light dont stay on, or show up during the process of checking for codes, it just blinks while revving and than is gone forever until the next rev, thats why im asking everybody this, thanks

scratchjunkie 07-10-03 02:53 PM

have you checked your coils?

turbojeff 07-10-03 05:12 PM


Originally posted by mcfly4001
hey, n/arotary, yeah i know all the check engine codes, practically got them memorized, but my light dont stay on, or show up during the process of checking for codes, it just blinks while revving and than is gone forever until the next rev, thats why im asking everybody this, thanks
I know someone with a car like this. It revs fine up to 5000 or 5500 rpm, then it's like it hits a wall sputtering and missing, the check engine light will flicker (not blink). It happens under boost, not under boost and even with the clutch in.

The code isn't stored, there are about 7 things (I think) that will cause the engine to go into limp home mode but the ECU won't store the code.

mcfly4001 07-11-03 09:57 AM

scratch junkie, yes i have checked my coils, thanks thought,

turbojeff, dude, tell me the 7 things! please!!!!

anyone else?

thanks

maxpesce 07-11-03 12:49 PM

The CEL should STAY ON in limp mode - Also in Limp mode the engine should NOT rev freely past 3000 rpm.

mcfly4001 07-11-03 02:12 PM

mine dont stay on, and it gets better, to almost non existant, after it runs for a while, but its still there if u rev it slower in neutral, and when u push the clutch pedal in, its worse, but almost non driveable at first crank, and while, and only while, its cutting out, and sputtering around, the light blinks, than goes out, so what do yall think?

mcfly4001 07-11-03 11:59 PM

anyone else

mcfly4001 07-14-03 09:03 AM

bump


All times are GMT -5. The time now is 06:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands