RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   oil pressure gauge/level indicator (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/oil-pressure-gauge-level-indicator-701495/)

supraturbo1987 11-02-07 12:17 PM

oil pressure gauge/level indicator
 
When the low oil level indicator o nthe oil pressure gauge lights up, does it emit a buzzing noise like the add coolant light does to help alert you when the level is too low?

Trev

Sprockett 11-02-07 12:23 PM

Not that I'm aware of. That oil pressure gauge is usually crap, anyway...at least the sending unit is.

supraturbo1987 11-02-07 12:27 PM

I wonder why it wouldn't buzz like the add coolant light if the level was too low.

Trev

Sprockett 11-02-07 12:29 PM

The dip stick measures oil LEVEL. The gauge measures oil PRESSURE

supraturbo1987 11-02-07 12:38 PM

I know that, I am saying that when the light on the gauge illuminates, it indicates low oil level. I wanted to know if it buzzed when the light came on, or does it just come on and not buzz? The reason I ask is this:

I was on the interstate this morning doing 40-50 in 5th. I started to smell a burning. 5-10 seconds later I look on my gauge, and oil pressure is about 20! I quick pull off to the side of the road (coasted) and shut it down. I then had about a 3/4 qt on the ground in a puddle(not sure if it was remaing that was driping from the underpan or if it was oil that gushed out when I stopped. I hope it was that because that means I still had oil in the motor after I pulled to the side of the road). Turns out to be a custom line I made to connect my dual oil coolers that slipped off of the oil cooler hardline. I never got a low oil light indicator and I shut it down and towed it to work. I am fairly confident that I didn't run out of oil. I am putting the car up on a lift tonight and checking out the situation. It makes me sick to my stomach really, but I am pretty sure I didn't starve the motor...

Sprockett 11-02-07 12:44 PM

Again, I don't think it buzzes. I had a problem with my sender unit, so the gauge would jump from 0-whatever, but I never heard an audible tone. Why doesn't it buzz? Engineering lol


All times are GMT -5. The time now is 05:24 PM.


© 2024 MH Sub I, LLC dba Internet Brands