OEM Part Heaven in 2007: Ray Crowe has gone CRAZY with his prices!
 

Lol. Sorry guys, sometimes I get carried away, but I like to make these posts interesting :git:

Here's Ray's newest sale for rx7club members through the end of February. All prices include free shipping in the USA, his phone # is 888 533 3400, email is hmkparts@aol.com.

1---R1 LIP $105.

2---COMPLETE COOLANT HOSE KIT (14 Pieces) $160.

3---FUEL HOSE KIT $70.
(consists of All fuel hoses in engine bay and everything needed to install....gaskets, vac lines, inj seals, etc)

4---FUEL PULSATION DAMPNER $105.

5---TUNE UP KIT (PLUGS, OIL FILTER, WIRES, FUEL FILTER, PCV) $125.

6---CENTER CONSOLE SWITCH PANEL (93 OR 94 FINISH) $70.
(this is the piece that houses the ashtray and surrounds the shifter)

7---DRIVER'S DOOR ARMREST COMPARTMENT WITH LID (93 OR 94 FINISH) $160.

8---PILLOW BUSHINGS (6) WITH DUST SEALS (12) $360.

9---STAINLESS STEEL SCUFF PLATES (SET) $140.

10---OIL PRESSURE SENDING UNIT $75.

11---ENGINE OVERHAUL KIT (ALL NEW SEALS, SPRINGS, GASKETS, O RINGS) $920.
(Note that this does not include the bearings or metal oil control rings. It does include everything else needed internal to the motor, including the oil pan gasket).

Very nice..I'll have to give him a call about that center console switch panel..

nice deals...i was just about to make my first call to him, next week ...good timing... :)

Any deal on AC panel?

I can ask him. I know it's only available in the '93 finish now though, which sucks.

how much is the overhaul kit normally???....going to need one...might just buy it now...

great timing on the overhaul kit, i might have to make a phone call soon!

any pics on the scuff plate?

^^ those are the silver aluminum finish ones with the gold rx-7 logo
looks nice.
and its 140 shipped...i think im gonna have to give ray a call tomorrow

i would assume its the standard brushed aluminum ones that has the RX-7 in gold

wonder if he has some brake line on sale too...need to give him a call...

not the passenger door handle this time? the newer reinforced ones?

damn you rich, you and your good deals from malloy!! :tonque:.

Good looking out Goodfella :icon_tup:

i hate these threads, they make my bank account drop back down to zero

+1 on the AC panel. If you can, ask him about tan door panels as well, I'm looking to replace mine. Oh! And the defroster vents at the bottom of the windshield, I need a new set of those as well.

The defroster vents are cheap, less than $100 for all three pieces.

The door panels, I dont think you'll want the answer, they are expensive as hell.

For those wanting the a/c panel----when you call up to order the other parts, ask Ray for a price ;)

Uh oh, are the door panels really that much?

How much do the cooling fan relays usually cost?

If you guys are just looking for a price quote, the best thing to do is probably just email him at hmkparts@aol.com. He sells an assload of parts, so it can be tough to get him on the phone.

Well, I actually need those relays. I was just curious as to how much they cost. So are all prices down or just a select few items?

Rich, if we want to begin an account with Ray, should we call or email?

You aren't interested in buying used ones in the for sale section?I usually see some pretty clean ones show up.

2 or 3 piece apex seals?

Sorry Rich, I didn't want you to be the middle man getting quote for people. I was just curious if you knew the price on top of your head.

Thanks for letting us know! I called Ray couple of days ago pricing few things and just for got.. Maybe we should make a list and someone call him and post?.. Not me! LOL!

I typically call him, but he is sometimes to tough to get ahold of. I can't count the number of times I've been on hold listening to their horrible sales jingle, lol. I'd use the email as a last resort.

Mazda only sells 2 piece apex seals now.

His normal everyday club prices are pretty damn cheap. I'm pretty sure the sale items are close to cost, can't ask for better than that :)

news to me, thanks Goodfella.

I may email him I think. Don't want to be on an international call on hold ;) Those fuel hose and coolant hose kits sound good to me especially since I'm swapping engines shortly!

Sure thing. I guess I should have said "all new apex seals from mazda are 2 piece----any 3 piece out there will be leftovers/old stock."

Well that was easy! 2 or 3 emails, 1 phone call and a set of pillowballs are heading over the Atlantic to me. Took about 15 minutes start to finish!. Thanks for the heads up Rich.

Steve

thanks goodfella. i think i'll be picking up that center console (plastic clips broke on mine) and the compartment. darn door fell off years ago.

price for ac panel
 

i just got an email back from ray, the ac panel is 190.

thanks Rich. I needed some of those items right there.

Thanks GoodfellasFD3s for your update on the goodies for sale. :)

Don't want to hijack GoodfellasFD3S thread, but another item is on sale. I contacted Ray via e-mail today and the Heat/Hood Insulator Hood Insulator w/ all 13 clips FD01-68-601C (resides on underside of hood) is $150.00 shipped. I will order it tomorrow (if opened on Saturdays) but for sure on Monday. Wanted to add to the good deals Ray is offering. :)

Pic of Hood Insulator: FD01-68-601C

Double post

heh, I forgot to post up that last price on the underhood cover. I bought one brand new a few years ago and it definitely helped to clean up the appearance when I pop the hood. Lots of guys have all these shiny mods in the engine bay, but when your engine cover is full of holes and is hanging down in pieces it kinda detracts from the 'wow' factor a bit, lol :D

Hot dangit. I ordered my FPD two weeks ago for full price.

Hmm, well Ray hasn't replied to my email yet I sent it Friday...guess he must be busy!

Well, give him a little time... I don't think he works on weekends.

No problems I will do :)

does anyone know of the fitment of the aluminum sills? all the others i've heard scrape and dont fit to well. how do these fit and any pictures?

Well as far as I can tell these are the official Mazda ones so they should fit well?

They aren't aluminum...

I still can't believe that...it's prob a $5 piece of plastic, at most

sorry... i meant stainless. anyway fitment feedback?

Yup, and that's with Ray selling it almost at dealer cost.

You know it's not just the lid right Mark? It's the entire drop-in compartment.

Mine fit well after.....after 3 years no scraping on the pass side and minimal scraping on the driver's side. I think a lot has to do with how tightly you get them mounted, and how loose your door is on the hinge.

I need a new job so I can afford to order all this stuff I need :(. Someone loan me a couple grand. :)

i loan you some dough... 50% apr for 12 months ;)