RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   number of New crate Engines (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/number-new-crate-engines-1024791/)

Lock & Load 01-30-13 09:57 PM

number of New crate Engines
 
Hi guys

According to our Mazda dealers here in Australia the total amount of Mazda FD RX7 Crate engines left is 6 ..... 3 in New Zealand and 3 in Japan .


I was lucky enough to get my hands on one from New zealand they dont come cheap anymore just under $9000 .:(

Gilgamesh 01-30-13 10:12 PM

you.are.nuts

9k for a pported 3 rotor.... ok

B-TAG 01-30-13 10:19 PM

how much does a fresh rebuild usually go for say all new seals and bearings more of a refresh

Dvst8 02-01-13 10:09 AM

https://forgifs.com/gallery/d/165248...owing_cash.gif

RotaryEvolution 02-01-13 06:35 PM

$9k for a stock motor... probably has the 3 piece seals still also, not to mention 20 year old original coolant seals(rubber).

fendamonky 02-01-13 11:44 PM

I got the last new one from Malloy here in America. First order of business was breaking it apart for a rebuild with stronger seals, higher compression rotors, a street port, and stronger tension bolts (Elliot's kit).

gracer7-rx7 02-02-13 01:43 PM

I got one of the last new motors also. IRP pulled it apart for porting. Quite nice.

fendamonky 02-02-13 02:09 PM

3 Attachment(s)

Originally Posted by gracer7-rx7 (Post 11363563)
I got one of the last new motors also. IRP pulled it apart for porting. Quite nice.

Aye, I was especially pleased considering my last engine looked like this:

Attachment 683760

And the previous builder claimed it was all "well within" Mazda specifications... :scratch: (and yes, those are two gouge marks in my iron.. no idea how they got there but this pic was taken less than 1,500 miles after a rebuild)


I'll take this:

Attachment 683761


Over that:

Attachment 683762

Any day of the week!

Lock & Load 03-08-13 12:08 AM

Yeah we have pulled engine apart and extend ported it cleaned it up .
Should be back on the road soon

Because my car is street driven and its a.... 2002 Spirit R type A i have kept the twins sequential but have exhaust mods , intercooler , radiator , intake High flow revolution twin turbos etc etc so i am happy with 320 whp at 12PSI


All times are GMT -5. The time now is 06:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands