No Spark
Did a half ass search decided to just ask.
So here's the problem. Car will not get a spark. However when i push start it i will start right up. For a while i was having a hit or miss when i tried to start the car using the key. I would crank it and nothing come back the next day car will start right up. the other day wasn't so cold so i pulled the wire and had a friend crank it.... I used my self as ground haha. However i didn't get shocked so no fire. lol Mods are. Single swap with all the support. I have pretty much Stock Ignition. just put in new NGK 9's all around with Magnacore 10mm wires andT2 Coils. I replaced the Ignitor thinkin it would be it.(SP?? igniter) still nothing. at least i have a spare now.... any idea's ? |
Btw starter is fine.
|
Are you running an ignition amp with the T2 coils?
|
No
|
|
I Had a similar problem, the ECU wasn't get an RPM signal (No RPM reading during cranking on the PFC). Car would fire up sometime, and wouldn't others. What I did was simply move the pulley sensor (not sure what's called, thing that reads engine position.. similar to Crank Angle Sensor function) closer to the pulley ring. I just added two small washer behind the sensor to narrow the gap between the sensor and the ring on the main pulley. After that, never had a problem since, and been over 3 years now.
Hope that helps. |
All times are GMT -5. The time now is 04:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands