RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   No primary turbo after intake removal (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/no-primary-turbo-after-intake-removal-1135695/)

Fraz McLennan 05-06-19 12:51 AM

No primary turbo after intake removal
 
What could cause there to be little to no primary turbo boost after removing the upper most intake. HKS intake. It is now refitted and everything appears to be attached.

I have about 2 psi of boost right up until 4500rpm then it hits the normal 10psi. This all worked fine until the the upper intake was removed.

https://cimg6.ibsrv.net/gimg/www.rx7...ae18cd684e.jpg

DaleClark 05-06-19 07:50 AM

Check the vacuum lines going to the back half of the Y-pipe. If the charge control valve or charge relief valve have vacuum lines off you would get some weirdness.

Dale

Fraz McLennan 05-06-19 11:23 AM


Originally Posted by DaleClark (Post 12345659)
Check the vacuum lines going to the back half of the Y-pipe. If the charge control valve or charge relief valve have vacuum lines off you would get some weirdness.

Dale

Vacuum lines are pain in the ass lol. Cheers mate will have a play about.

Fraz McLennan 05-15-19 11:18 AM

After removing the upper intake again and the vac hoses it turns out I must have pinched one putting the intake back one. Dale wins again! Cheers bud.

DaleClark 05-15-19 01:14 PM

That can do it! Glad you sorted it out!

Dale


All times are GMT -5. The time now is 02:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands