RX7Club.com - Mazda RX7 Forum - No more door slamming?

Page 3 of 3

Show 50 post(s) from this thread on one page

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - No more door slamming? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/no-more-door-slamming-961133/)

BlackEuropa

05-23-18 12:56 AM

Thanks for posting the part numbers Tom. Great info.

Going in my resource file.

- Dave

DaleClark

05-23-18 09:32 AM

Quote:

Originally Posted by Ceylon (Post 12276239)

Here is the late spec inner seal, rest of the seals look the same across models.

https://farm1.staticflickr.com/970/4...c41ec884_c.jpg

Part numbers are:
Left: FD0168912B-02
Right: FD0168911B-02

HTH
Tom.

Thanks man!

Amayama.com shows it as $85 or so per seal. FYI, that's a great place to get JDM parts from.

Dale

SpeedCrazie

05-23-18 04:09 PM

Anyone happen to have part number for optinal hand placement piece?

DaleClark

05-23-18 07:45 PM

That was a Mazda dealer accessory, I've seen them pop up on Ebay every now and then. I don't think they are available new any more but I could be wrong, most of those dealer accessories aren't around any more.

You could probably make something that would do the trick pretty easily, it's not a very complicated part.

Dale

ZoomZoom

06-01-18 01:14 PM

Just an FYI. I ordered some new drivers side door hinges just in case I can’t adjust mine to my satisfaction. Unfortunately the lower hinge is back ordered. I have to assume that is the more likely of the 2 to get bent over time.
Hopefully it’s not NLA and eventually ships.

SpeedCrazie

06-01-18 04:56 PM

Quote:

Originally Posted by DaleClark (Post 12276733)

Thanks man!

Amayama.com shows it as $85 or so per seal. FYI, that's a great place to get JDM parts from.

Dale

Unfortunately for us these are no longer available from them.

Anyone else have have a source?

kensin

06-01-18 06:04 PM

Quote:

Originally Posted by ZoomZoom (Post 12278736)

did you order from ray ? When I spoke to him a month ago he said the lower one is NLA

ZoomZoom

06-05-18 03:50 PM

Quote:

Originally Posted by kensin (Post 12278778)

did you order from ray ? When I spoke to him a month ago he said the lower one is NLA

I ordered them through my Mazda Motorsports account. I suspect Ray is correct about the lower hinge.

jza80

06-05-18 05:12 PM

Might want to check with amayama.com or one of the other Japan-based suppliers about the hinge.

I have the updated door seal mentioned in this thread on my driver side, the door still requires a good firm pull with follow-through to close...

All times are GMT -5. The time now is 06:40 AM.

Page 3 of 3

Show 50 post(s) from this thread on one page