New gauges with some #'s
Well i just got done installing a triple gauge pod and a single pod.
I now have Autometer: Water Temp Elec Oil Pressure Boost/Vac EGT Well i was wondering if these numbers where about right for my mods Intake Non-Seq DP, MP, Catback Normal Cursing @ 65mph Water temp is about 185-190F Oil Pressure is about 75psi Exhuast Gas Temp is about 900-1000F When i do a quick run 40-100 Water temp still stays 185-195F Oil Pressure is about 100-110psi Exhuast Gas Temp maxed out at 1300(But it reacts kinda slow) I will post some pics tomarrow about my gauge setup. Here is a quick rundown Autometer triple gauge pod Water Temp Elec Oil Pressure Boost/Vac EGT Low oil pressure light >18psi High Water temp 205F on Fan on Light (Lit-up when fans are on) Boost Indicator Over-Boost indicator Also was able to use the stock oil pressure gauge and water temp Like i said i will have some pics and a whole write up. Thanks for Reading and your ideas on normal temps |
Just thought of something,
CHANGE YOU THERMOSTAT IF YOU DONT NO WHEN THE LAST TIME WAS! I replaced mine when i pulled the housing for it and the rubber was cracked and missing in parts, could have stuck possible. |
All times are GMT -5. The time now is 04:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands