Need some quick help
 

Here is my problem: One of my injector is sticking the front primairy. I have the uim off and put a 12v source to the injectors and can hear them open and close. I wanna check the connections before i put it back together. Is there a way to see if power is getting from the ecu to the injectors?

The injector were cleaned and flowtested by RC but they sat for a couple of months before being fired up. And i've read the stuff they clean them with is known to gunk the injector up if they aren't used shortly after they are cleaned.

Thanx
Cyan

Yes, there are steps in the manual to test this... Just use a multimeter on the injector connector with the car on AC.

Thanx for the quick reply. I don't have the manual and www.iluvemyrx7.com stopped working before i could download all the info.

thanx again man......bookmarked