RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Need help to diagnose this clunking noise (video inside) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/need-help-diagnose-clunking-noise-video-inside-959905/)

bolg033 06-27-11 09:34 PM

Need help to diagnose this clunking noise (video inside)
 
1994 manual rx7

here is a youtube video of the clunking noise

it happens at idle and i can hear it more inside the car and i think forward under the car. you cant really hear it in the engine bay.

if anyone can help or needs any more info please ask and i will do my best.

thanks in advance

http://www.youtube.com/watch?v=cCPUD5G-xPg

bolg033 06-27-11 09:35 PM

its a little bit dark out but you can hear the noise clearly

bolg033 06-28-11 06:22 PM

anyone! :P

oyvindjs 06-29-11 03:42 AM

Does the intensity, frequency and loudness follow the rev-curve?

Is it the same during idle, in gear but clutch in?

oyvindjs 06-29-11 03:43 AM

heres another forum member with a klonking noise.

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/knocking-noise-959460/

bolg033 06-29-11 07:23 AM

I'm pretty sure when I push in the clutch pedal the noise goes away

I don't hear it well driving only well I'm stopped and in neutral and after driving for a bit

It sounds like it could be coming more from the transmission but I can't pin point the exact location

Also it doesn't do it all the time.

My friend said his is doing close to the same thing and he thinks it's a clutch barring on his. Were gonna get together tonight and compare clunks lol

bolg033 06-29-11 07:24 AM

His jeep *****

vosko 06-29-11 07:41 AM

sounds the trans to me but could be anything

oyvindjs 06-29-11 08:07 AM

clonking like this should leave some sort of leftovers if its in the gearbox/bellhousing/clutcharea... if you can, lift car and open inspectioncovers on the transmission(two covers that sits on the bellhousing), and check to see if theres any metal spoons there... or, to see if anything rubs, or if the sound intensifies. Start the car on the lift and open covers. :)


All times are GMT -5. The time now is 09:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands