need help before ordering parts
Just bought a 1994 RX7 with blown apex seals.
Looking for some advice on mods to go with the Mazda reman engine. Here are my thoughts on upgrades / replacement parts while engine is being replaced: koyo n-flow radiator noltec motor mounts hose techniques silicone vaccum hose kit greddy airinx intake exedy stage 2 clutch gotham racing ceramic coated downpipe and midpipe or high flow cat HKS carbon TI catback exhaust relocate battery replace primary and secondary injectors along with fuel pump and fuel filter replace ast greddy smic intercooler (although I really like coolcharge iii except price) apexi power fc and commander with apexi boost controller I bought the car for dirt cheap and the Mazda reman engine will also be purchased for way below mkt value all suggestions and comments welcome |
boost gauge. don't think you need the exedy stage 2 clutch, only if you are going to run big HP. Get a good tune also.
|
if you run a midpipe, port the wastegate on your turbos
|
I DO believe he'll need the clutch, people making over 300rwhp have mixed results with the stocker. Maybe a light flywheel while you're in there.
Instead of putting new 550s in the primaries, you might want to explore your options using 4x850s. They're going to be out anyway, and you have a PFC that can be tuned for it. Too much fuel capacity is FAR better than too little... |
You'll definitely want a stronger clutch.
|
All times are GMT -5. The time now is 11:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands