RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Mystery Item (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/mystery-item-714533/)

jhcrazyboi 12-20-07 02:22 AM

Mystery Item
 
Ok, i was putting back my car piece by piece and run into a few item that i dont really know what it is and what plug in to it. The car is was auto and in the process in swapping over to a manual. So far i swap almost every thing to manual beside the gauge harness.

The item is right behind the flasher unit and doorlock relay.
http://i161.photobucket.com/albums/t...cture012-1.jpg

badddrx7 12-20-07 04:35 AM

That would be the mystery item " key interlock resistor" for the auto tranny shift lock system. Seach in your shop manual under Z-76 EC-AT shift lock system. I removed all three of me FD "mystery items" when I did those conversions.

later

jhcrazyboi 12-20-07 04:41 AM

Thank a lot for the information that damn wire was driving me nuts.

jhcrazyboi 12-20-07 04:50 AM

I got one more item, not really an item, but a plug.
here it go.
http://i161.photobucket.com/albums/t...Picture015.jpg
Is this just a unless plug?

badddrx7 12-20-07 01:52 PM

No it's not a "unless" plug but rather a useless plug. This is the "option switch plug, three wires Black, Brown and Brown/Yellow. Goes to CPU#2. You can view this "unless" plug on page Z-90 of your green shop manual.

Is this all you got ? C'mon you have something hard to answer, right :)


later

jhcrazyboi 12-20-07 05:12 PM

ooops forgot the E. Ok that useless plug it for a cpu, but for what cpu? the car alarm? Damn, how do you know where all the item and page number at, the one that is called the rx7 god?

badddrx7 12-20-07 06:40 PM

It's a spare plug to input something into the CPU#2 for purposes of alarming. Never seen anything offered on here to plug into it before ( probably something in Japan ), so disregard that 3 prone connector. When I did my harness strip downs I just cut it out, all the way back to the ground poitn, JB-01 connector and the hood switch wire.


Later


All times are GMT -5. The time now is 12:09 PM.


© 2024 MH Sub I, LLC dba Internet Brands