My GothamRacing.com Project Car... PICS!!!
Its in the works... but happy so far! Video Coming Soon!
http://www.imagestation.com/picture/...d/f9c64867.jpg Mods: Street Port HKS TA45CR (Close to T04R) (See avatar) HKS Wastegate PFC (Tuned by Steve Kan @ gothamracing.com) Apex'i FMIC Full Fuel setup -1600's in Keith's Rails Secondary -850's Primary -SS Braided lines running to AeroMotive FPR -RP FuelPump Full Ignition -Jacob's Rotary ProPack -2nd Gen coil -11's all around (Plugs) -Wires ACT Pressure Plate w/ disk SR Motorsports 9.5 lb Flywheel SS braided clutch line KaaZ Differential (Clunker) GothamRacing.com Rotors X-drilled and Slotted w/ coating Hawk HPS pads Double Throttle Eliminated along w/ all emmissions :D J-spec LIM Gothamracing.com Midpipe Apex'i N1 Dual Cat-back Apex'i AVC-R All bushings swapped to Jimlab ones (PolyUr.) R1 Suspension Koyo Radiator Greddy Type S BOV HKS Filter M2 Trailing arms and Toe links Random Stuff: 5Zigen Typhoon's w/ Yoko AVS-ES100 245/40 -17's All the DIY mods (Fan and such) R1 Racing seats Alpine Headunit C-West (Real) Front bumper RE-Tail light cover Boost and AFR Gauges Battery Relocated AST Strut tower Bar Carbon Fiber Dash kit... in the middle of install Polished UIM and TB Air horns In the works... Rest of C-west Kit 4 pt belts New motor (100 PSI compression, Getting old!!!) More Shiny Stuff Greddy Elbow (WTB connector pipe!!!!) Add extra Fuel pump New paint Power: about 415-25hp easy at 14psi Dyno comes after new motor! Video coming out soon of me toasting a single turbo s14 (I think) and TT 300zx Thanks to the Guys at Gothamracing.com for helping me get the beast on the road!!! http://www.imagestation.com/picture/...6/f9c647d7.jpg http://www.imagestation.com/picture/...7/f9c6489a.jpg |
|
|
that's gorgeous. looks very good, but not overdone, just the way they should be. i wanna see a dyno sheet and some numbers at the track. oh yeah, are you gonna take that to the revolution?
|
nice
|
sweet car.
|
Nice car man!
WHat size rubber you running, and what does she put out????????????? |
Not exactly my taste as far as looks go, but congrats on completing your project
|
Hey Ryker when's my ride???
NICE!!! |
Ryker, looks good man.... i would take that fuel line you have looped there and run it to the other side (port) or the regulator to keep it away from being directly over the heat of the DP. you dont want hot fuel.... :D
|
Looks great man! I think you should leave it just the way it is looks wise, looks very nice with the C-West front end and everything else stock.
In fact it has me reconsidering my 99 Spec front conversion and going with the C-West instead. Do you have any kind of belly pan installed underneath to direct air through the IC, radiator? |
that's REAL nice... :D
|
Thanks people...
Glass_man... no belly pan yet, need to have P/S cooling line rebent around my condenser before that part... also the sheetmetal vs fiberglass sheet is a deciding factor. Keith... Oh I know... there used to be some stuff there blocking the way before I went in there and cleaned it all out... I need to do that along w/ a exhaust side wrap boot. Spoolin... no revolution for me... its date is right around finals and that just won't mix. As for power... I know it has better power than my old T04S kit.... that gave me 425 @14psi... but the numbers won't give it justice untill a fresh motor goes in....who knows... maybe I can make it into the upper 400's... track would be interesting to see... Titan... 245/40 17's Radical rotary... soon, we will see! Brent needs to have another kegger! Also, I still have your 3" filter in my garage looking for a new home. :) |
Really nice car , the vent in the eye is not a common look.that was a nice touch. Plus a radar for the speed traps huh haha....much need for the speed you will be going at . but i would get one with a laser speed trap jamming function....just to be safe :)
ps; vids vids vids ...muhaha :devil: |
Speed so far... 155 or so... I can easly keep up w/ street bikes :D
|
Nice.
|
do you have any more pics of the RE-A light cover in the rear? Not very many people seem to have them or atleast I never see the pictures. Particularly interested in a view from the side.
|
Your car looks really nice. Congradulations. But your rotors are facing the wrong way, not that it really matters. Oh, and who is Gotham racing ;)
|
We'll have to run when I get my car back on the road with the new setup
|
sweeeet ride
price tag for all this joy? :p: |
WAY too much...!
These pics are dark... and kinda blurry but they will work :D http://www.imagestation.com/picture/...e/f9c52bcc.jpg http://www.imagestation.com/picture/...f/f9c52c03.jpg http://www.imagestation.com/picture/...e/f9c64a47.jpg http://www.imagestation.com/picture/...d/f9c64a1c.jpg |
keep us updated on the JimLab bushing install.... I need to do mine
are you installing zerks? |
Yeah they are already done except for the front lower control arms... all have been zerked :D not hard w/ a good bit and a few minutes...
|
|
when are you selling the whole car? I'm interested, and I have cash :)
|
All times are GMT -5. The time now is 12:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands