RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - Limp Mode (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/limp-mode-476178/)

speedygolf205

10-26-05 12:40 PM

Limp Mode

Right got a 93 rx7 but it keeps going into limp mode, grrrrr.
I can rev the car when in neutral but when i put the car in gear and start to drive it straight away jumps into limp mode. All the breather pipes are fine. Also gear change every now and then is a bit crap.
Any ideas?

satoacs

10-26-05 01:15 PM

auto or manual?

is it the hesitation, that is clearly described and has instructions on how to eliminate it, in the stickies?

limp mode isnt teh best description.....care to elaborate.........just a little

13Joe

10-26-05 11:24 PM

Are you on the stock ECU? open it up, and take a look at it, to see if anything's "burnt". I had this problem awhile back... i kept resetting the ECU, but as soon as i start her up, the car goes back to limp mode. Took out the ECU, and saw sections of the board "burnt"... and i had to replace the thing.

rynberg

10-27-05 01:21 AM

You need to check for codes....

http://www.fd3s.net/engine_codes.html

All times are GMT -5. The time now is 11:33 PM.