RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Just got the bnr stage 1s installed (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/just-got-bnr-stage-1s-installed-162495/)

777rx777 03-01-03 02:27 AM

Just got the bnr stage 1s installed
 
Just got the bnr stage 1 turbos installed my mods inc just dp , cb, walbro fuel pump, stock intake and stock computer. What is the most cost effective way to make this set up work because it feels real slow, and on the flipside i have to smog the car this week.

Please help...

777rx777 03-01-03 02:28 AM

Should i be reliable/safe driving with the above mods?

crazysuprakid 03-01-03 02:34 AM

The general conseus is 2 performance mods and your fairly safe... I would think you would be able to pass emissions withthose mods aren't bnr stage 1's just a rebuild? Correct me if i'm wrong.

777rx777 03-01-03 02:37 AM

its a rebuild, but the secondary is changed wheel, etc and ported wastegate, car drives fine but not as fast as the stock turbos were when the secondary turns on. do i need a different ecu? I need to pass smog first, please leave me all suggestions on how to pass smog with my mods without taking them off, ie "pass or dont pay" from kragen or whatever, i dont wanna have to go downt the pay "450 bucks" route;) if u know what i mean...

crazysuprakid 03-01-03 02:40 AM

Not familiar w/ california but I would assume you should pass as long as the catback is legal and the downpipe isn't too shiny. A power fc and some tuning might help those problems...

777rx777 03-01-03 02:44 AM

catback is the blitz nurspec, downpipe is hks not too shiny, cant see the turbos, and cant see the fuel pump, under the hood all the smog guys can see is my fluidyne and my ast. anything i should add to the tank to assure that it passes?

maxcooper 03-01-03 02:47 AM

You should be fine at a normal SMOG place. Most don't notice the downpipes, and you don't have anything that would make your car fail the sniffer.

-Max

crazysuprakid 03-01-03 02:53 AM


Originally posted by maxcooper
You should be fine at a normal SMOG place. Most don't notice the downpipes, and you don't have anything that would make your car fail the sniffer.

-Max

I was getting at what he said :D

777rx777 03-01-03 02:54 AM

any ideas of any good "test only" stations in san diego?

Cetchup 03-01-03 03:56 AM

With the stage 1's, only one compressor wheel is upgraged. You should be able to pass smog as long as you still have the stock cat. The only thing I see failing is the visual inspection (if they are anal about it). The BNR stage 1's are basically the same as stock with a ported WG. On the site, they say the upgrade one of the compressor wheels, but you won't make much more power without ECU, IC, and fuel mods. Even then, the power between stage 1 and stock TT isn't going to be much. Goodfellasfd3s made upwards of 350+rwhp on stock turbos. Why did you only go with stage 1? I have heard great things about the stage 3... Anyways, just make sure your visual inspection passes... you should be fine with emissions since you are on stock boost and stock ECU.

Silex 03-01-03 04:00 AM

The easiest thing to do, if you had a PowerFC, would be to set up a really lean fuel map. That way, you can't lose :).

777rx777 03-02-03 04:15 AM

i failed.....I love the state of california......always taking my money to justify their b.s. smog laws. and now my car is real slow with the bnrs...i need an ecu or something. Gots to put it back to stock du....


All times are GMT -5. The time now is 12:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands