3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Idle Problems

Thread Tools
 
Search this Thread
 
Old May 5, 2006 | 02:14 PM
  #1  
black93fd's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2004
Posts: 6
Likes: 0
From: cleveland,ohio
Idle Problems

When I Start My Car And It Goes Through The Warm Up Cycle My Idle Is At 1200 Instead Of 750 Rpm. Also When I Am Driving When I Come To A Stop The Idle Fluctuates From 1200 To 1000 Rpm All The Time And It Seems That I Need To Give Alot Of Gas To Accelerate Out Of 1st Gear. Vaccuum Also Fluctuates At A Stop. Any Suggestions Would Be Appreciated.
Reply
Old May 5, 2006 | 02:28 PM
  #2  
zonblitz's Avatar
Gone to the dark side
Tenured Member 10 Years
iTrader: (9)
 
Joined: Jun 2005
Posts: 1,066
Likes: 0
From: New Orleans, LA
Could be yoru TPS... also if you have a Greddy Elbow and you didn't plug off the hose that used to go to the old elbow will cause this...

you have a pfc?
Reply
Old May 5, 2006 | 06:42 PM
  #3  
silver_7's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: May 2005
Posts: 646
Likes: 0
From: Pensacola
mods?
Reply
Old May 6, 2006 | 08:32 PM
  #4  
black93fd's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2004
Posts: 6
Likes: 0
From: cleveland,ohio
The mods I have include a Greddy power intake, Bonez downpipe, Apexi catback, HKS boost controller. Everything else is stock. Vaccum hose job done upgraded to silicone hoses.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 07:59 AM.