RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   HKS Blow Off Valve Tuning (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/hks-blow-off-valve-tuning-892770/)

Kevs93FD 03-15-10 11:16 PM

HKS Blow Off Valve Tuning
 
I just installed a HKS SSQV in my FD. My car is an auto and everything is installed correctly. This is the bov with the tunable spring. I had an HKS bov on my previous 3000gt vr4 and this one sounds nothing like it, I can bearly hear it. My question is how do I properly adjust this. Im running stock turbos and stock boost.

Thanks Kevin

Kevs93FD 03-15-10 11:47 PM

I also hooked up the vacuum line that went to the stock bov to the HKS one.

rdahm 03-16-10 12:16 AM

barely hear it....hmmm i have a HKS SSBOV. did you plug it into the charge relief valve or air bypass valve port? the front one is the BOV spot, the rear one does something different for spooling up the second turbo.

its pretty loud on stock levels. there is a rear screw on it, but out of the box, it works well.

especially loud if it has the whistle front end on it. its that plastic 3 spoke piece.

Kevs93FD 03-16-10 07:32 AM

Its on the BOV Spot.

arghx 03-16-10 10:14 AM

maybe it's not very loud.

rdahm 03-16-10 02:40 PM

mine was/is loud! if you take the front whistle off, not so much. But stock boost etc, it was sexy. if you look at my engine bay, it was the first thing done to my car. lol

I hate posting this pic, but the past is past

http://www.turborx7.com/images/myrx7/Picture%20014.jpg

you can barely see it, but shes there.

kev, do you have the plastic whistle on the front? http://www.turborx7.com/images/myrx7/L_1160.jpg that three pronged thing? i know this isnt exactly your model, but close enough.

rdahm 03-16-10 02:45 PM

retarded looking video, but it shows the different sounds an HKS can make.

http://www.youtube.com/watch?v=HblCEQXQ8Q4

can you give its some throttle while in the engine bay and hear that baby?

Kevs93FD 03-16-10 02:57 PM

Ya i have the original plastic piece on there. On the back of my bov there is a screw, Im gonna mess with it today.

Mr.FD3S 03-16-10 03:33 PM

theres a couple of fins for different sounds. i love the gold fin myself

FD3S2005 03-16-10 08:04 PM

Hat last one sounded like it had an echo to it..

rx7rcer09 03-16-10 08:40 PM

sorry to invade but which insert causes the flutter sound, when i think SSQV i think of the flutter sound.

Kevs93FD 03-16-10 09:07 PM

You guys dont really understand my problem, I cant even hear the BOV and when i have some one go to rev the car up i put my hand near the bov and cant feel any air when they let off the gas pedal.

rdahm 03-16-10 09:42 PM


Originally Posted by rx7rcer09 (Post 9872400)
sorry to invade but which insert causes the flutter sound, when i think SSQV i think of the flutter sound.

flutter sound is similar but not the same to the OPs problem. that would be compressor surge, not enough air leaving the bov and exiting the turbo.

nero1106 03-16-10 10:51 PM

I get that flutter sound sometimes. Is there a way to get rid of it?

FD3S2005 03-16-10 10:57 PM


Originally Posted by Kevs93FD (Post 9872483)
You guys dont really understand my problem, I cant even hear the BOV and when i have some one go to rev the car up i put my hand near the bov and cant feel any air when they let off the gas pedal.

for one you need to have boost pressure that the bov has to release. it shouldnt be as loud just reving it up you should be able to hear it. maybe it could be the location or an actual problem with the unit... put it on a dyno and test it with the hood open i guess is 1 option.. the newer hks ssq dont use the springs unless its the old one or a knock off

as for that flutter that is bad, thats the extra pressure not being released and is not good for the car.

rdahm 03-17-10 12:22 AM

I don't mean to hijack the thread but regarding flutter, get as much air out asap. That said, look up arghx thread on "8 months blah blahblah no blow off valve something something" i don't remember the exact title but fascinating discussion on compressor surge. Both figurative and practical.

Off tangent. Sorry kev. :-)

nero1106 03-17-10 10:24 AM

Thanks rdahm. I found it. Just in case anyone else needs it .... https://www.rx7club.com/showthread.p...hlight=flutter. Sorry about the hijack.


All times are GMT -5. The time now is 01:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands