RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Hesitation at 4500 rpm (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/hesitation-4500-rpm-24654/)

pietrino 10-07-01 04:34 PM

Hesitation at 4500 rpm
 
:(
I bougth a 3°generation RX7 i live in Italy,
when i'm at full throttle the car start to increase speed and rpm but at 4500 it as a very short loss of power of half second, but is strange because its do that very often but not always.
this car was unused for a long time but it as only 5000 KM (about 3000 miles) all most new
Someone can help me???
Regards
Pietro De Lorenzo
:(

capt. bill1 10-07-01 11:42 PM

It`s normal. 4500 rpm is the change over point from the primary turbo to the secondary turbo. Get a boost gauge and you should see the boost build to 10psi then dip to 8 psi at 4500 rpm and back up to 10 psi quickly.

pietrino 10-08-01 12:33 PM

tanks but...
 
may be you'r right but i guess i shoudn't feel that,
i think should be regoular from 1000 to 7000 rpm

capt. bill1 10-08-01 03:56 PM

Well, install a boost gauge and see what the boost dip is at change over. Perhaps you`r boost pattern is off.

Flybye 10-08-01 10:31 PM

Its actually VERY easy to adjust the boost pattern at 4500rpm.

Just hurry up and get that boost gauge :p

7at11 10-10-01 12:11 PM

http://home.istar.ca/~dvandit/rx7stuff.shtml

You'll get a good explanation of the 4500 rpm crossover and diagrams, troubleshooting, and so on....

pietrino 10-10-01 12:59 PM

tanks
 
;)
i want to tanks you for all your help.


All times are GMT -5. The time now is 10:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands