RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Help Troubleshoot Bucking (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/help-troubleshoot-bucking-1049465/)

jon4825 10-21-13 11:22 PM

Help Troubleshoot Bucking
 
I searched the forum for jerking or bucking during deceleration and the results are all over the place.

Can someone help me put together a plan on how to trouble the issue?

While decelerating in gear at both low and highspeeds the rear end starts to jerk and buck. It does not stop until I either accelrate or put the clutch it. It happens when I am at 65 mph and braking.

My search results stated it could be TPS, Dashpot, Differential Mount, etc.

I definitely feels like a drivetrain issue like the rear end or transmission needs to be braced to keep it from jerking back and forth. I am really posing the question because I dont understand how a TPS or Dashpot could cause this issue.

Thanks for the help in advance,

Jon

Banzai-Racing 10-22-13 06:45 AM

You have a microtech, do you have the decel fuel cut set up?

t2ae 10-22-13 07:22 AM

tps could easily cause all types of bucking and jerking. just be sure its in spec

jon4825 10-22-13 09:23 AM

Thanks for the microtech advise on the decel fuel setup. I will also search on how to diagnose a TPS. Car is in the body shop so I will post update in a couple days.

jkstill 10-28-13 08:28 PM

+1 - Adjusting the TPS 100% fixed that issue in my FD.

IRPerformance 10-28-13 09:23 PM

Diff bushings, motor mounts, pillow balls. As said above, check your deccel fuel cut too. Should be below 1400 in most cases.

Banzai-Racing 10-30-13 06:42 AM

Microtech is a vacuum set point actuated decel fuel cut.


All times are GMT -5. The time now is 05:28 AM.


© 2024 MH Sub I, LLC dba Internet Brands