I'm trying to change out my brake light bulbs in my '93 VR FD. I got the centre tail light section out, but can't get the side ones off. It feels like they are gonna break if I pull any harder be it up or out. Can somebody clue me in as to what it is that I'm not doing right? Or am I just not putting enough *** into it?? I'd appreciate all help. Thanx.

Zach

 

push the right one to the right, the left one to the left.

 

Actually my friend had the same problemwith his 93 silver base. All we did is pull harder. Make sure you have removed all attachment screws and pull. There are three plastic clips for each light assembly that hold them in and they are ussually very hard to remove the light assembly from. Just keep pulling out and you'll get it.

 

Thanx. So just as long as I pull/push them straight out to the sides then I shouldn't have any problems right? I just would hate to break a damned tail lens by trying to keep myself from getting a traffic ticket for a burned out bulb!!

Also, any volunteers?? I have to change my oil pan gasket this weekend!!!!!