Help! Non-Seq Conversion
Thread Starter
Junior Member
Joined: May 2002
Posts: 47
Likes: 0
From: Plano, Tx
Help! Non-Seq Conversion
I'm at the end of the Don't_Be_a_Rikki's non-sequential conversion. However, the last instruction is to:
"Remove the pressure chamber and below this chamber are the 2 solenoids (turbo precontrol & wastegate control). I used the turbo precontrol and plugged the lines to the waste gate control at first but now I have changed it to the wastegate control feels like a better respone to me IMO. Try the precontrol first to see how you like it and if you dont switch them around."
I don't know where the lines are that need to be plugged.
Any help at all would definately be appreciated.
"Remove the pressure chamber and below this chamber are the 2 solenoids (turbo precontrol & wastegate control). I used the turbo precontrol and plugged the lines to the waste gate control at first but now I have changed it to the wastegate control feels like a better respone to me IMO. Try the precontrol first to see how you like it and if you dont switch them around."
I don't know where the lines are that need to be plugged.
Any help at all would definately be appreciated.
They jacked me up too.
Thread
Thread Starter
Forum
Replies
Last Post
