help identifying part
Thread Starter
Joined: Mar 2005
Posts: 1,584
Likes: 1
From: Massachusetts
Hey guys,
I found this in a 87 RX-7 parts car I bought. It obviously doesn't fit a 2nd gen,but maybe it is for a 3rd gen. Take a look at the pics,and help me out. I am a 1st gen guy,so I have no idea what this is.
I found this in a 87 RX-7 parts car I bought. It obviously doesn't fit a 2nd gen,but maybe it is for a 3rd gen. Take a look at the pics,and help me out. I am a 1st gen guy,so I have no idea what this is.
Thread Starter
Joined: Mar 2005
Posts: 1,584
Likes: 1
From: Massachusetts
Can someone tell me how to ohm it out,so I know it is good? I would just plug it in,but I don't own a 3rd gen,nor do I have access to one. I would like to sell it,but I can't in good conscience do that without knowing it is good.
Yep, that's a 94-95 power window switch. The auto window down feature was added in '93.
The way they normally fail is the switches physically will break. If the buttons go down and pull up smoothly, it's most likely good. If you want to go the extra mile, get the shop manual from the stickies at the top of the forum, it should have a test method for the switch.
I'd say you could get $50 EASY for the switch. They're a somewhat common failure point.
Dale
The way they normally fail is the switches physically will break. If the buttons go down and pull up smoothly, it's most likely good. If you want to go the extra mile, get the shop manual from the stickies at the top of the forum, it should have a test method for the switch.
I'd say you could get $50 EASY for the switch. They're a somewhat common failure point.
Dale
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
driftfcbuckey
The Bad & Fugly Members
10
Dec 2, 2015 05:48 PM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM






