3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

HELP!!! Flooded engine???

Thread Tools
 
Search this Thread
 
Old Mar 27, 2006 | 11:27 PM
  #1  
perscription 7's Avatar
Thread Starter
RX seven
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 10
Likes: 0
From: TX
Exclamation HELP!!! Flooded engine???

Ok the other day i decided to take my 7 for a ride and it wouldnt start. The bat feels fine, and it aint the starter. When i turn the key the car cranks just as it has always done. It feels like theres either no gas getting in or possibly...too much? I think it may be flooded cuz the last time i remember turning the car on i did turn it off shortly after. Also if u guys think it is flooded then how do i unflood it? I have tried to search for the procedures online to do so but it only gives dirrections on how to unflood 1st and 2nd gen 7's. Can any of u fellow rotor owners help me?
Reply
Old Mar 27, 2006 | 11:47 PM
  #2  
DaiOni's Avatar
Wankler
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 1,565
Likes: 2
From: Kobe, Japan
WOT + turn the key for 15 seconds
no throttle + turn the key for 15 seconds
repeat until she kicks over (and resist the temptation to pump the pedal when it starts to chugg into life).

you will get advice to pull fuses and plugs and **** - but try the basic method first - a hell of a lot easier (and it's always worked for me)
Reply
Old Mar 27, 2006 | 11:47 PM
  #3  
DaiOni's Avatar
Wankler
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 1,565
Likes: 2
From: Kobe, Japan
...and it can take a while for it to work - so don't give up too quickly
Reply
Old Mar 28, 2006 | 12:26 AM
  #4  
sevensix's Avatar
rotor rotor pow.
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2005
Posts: 3,170
Likes: 1
From: Southern CA
if that doesn't work ^ next take out the plugs and crank till the fuel is spit out, btw cover the spray path so it doesn't make a huge mess.

replace the plugs and then crank it should start, u'll notice a bad erratic idle, its pretty scary the first time u experience it, and a TON of smoke will be pouring out the exhaust. i set off the fire alarm the last time i performed a de-flood.

plus u can pull the pink 30A EGI fuse if u want to lol. once its done smoking u can then replace the fuse, crank, and it should start up fine, smoke for a while longer, and u're set.

btw all the cranking may drain your battery, have a jumper cable handy or a charger.
Reply
Old Mar 28, 2006 | 12:37 AM
  #5  
perscription 7's Avatar
Thread Starter
RX seven
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 10
Likes: 0
From: TX
Well im no expert so i'll try the 1st method LOL... hope it works. Thanx guys!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
82streetracer
Haltech Forum
11
Mar 11, 2019 05:34 PM
PhillyFC
General Rotary Tech Support
9
Aug 21, 2015 06:36 PM
86glxNA
New Member RX-7 Technical
7
Aug 18, 2015 03:33 PM
zuesskroph
2nd Generation Specific (1986-1992)
0
Aug 13, 2015 06:05 PM




All times are GMT -5. The time now is 07:28 AM.