help, coolent light
 

ok my coolent light/buzzer constantly stays on after I installed my polished manifold back....There are no bubles and the coolent is full. What could I have touched/disconnected? and where is the sensor located? on the front of the housing right?

tks,
David

The sensor is located on the housing below the filler cap. However there's a single wire in the left side of the engine bay in the area of the spark plugs where the main wire harness runs. Look for a single wire coming out of the main harnress & follow it to it's connector, which may be broken/loose. If you plug it back together with the buzzer going, it may take a few seconds for it to go off, ie not instantaneous.

hmm now that you mention it....I removed the powersteering pump so I can remove the A/C. So I think I might have removed it. Well the A/c is not in anymore so there might be more than one wire in that area, any tips on what the wire looks like?

tks!
David

bump for sidestick to help me :)

if I am not mistaken, it is a single black wire with white connector on top of themrostate housing. look at your thermo housing. on the side of the rad there is a singel wire coming oiut, follow it.

at least I am pretty sure that is it.