3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help!

Thread Tools
 
Search this Thread
 
Old Sep 9, 2001 | 05:54 AM
  #1  
TsumiKinetic's Avatar
Thread Starter
Full Member
Tenured Member: 25 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 125
Likes: 0
From: Chamblee, Ga
Help!

I just installed my downpipe which was a Rx7fashions SS with 2000 degree jet hot coating on it. Well my problem is on a hard left turn it sounds like the front end is going to rattle apart. Any ideas what it is?

Tsumi Kinetic
93 Montego
Reply
Old Sep 9, 2001 | 02:00 PM
  #2  
spooledUP7's Avatar
There and back again
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 967
Likes: 0
From: Camarillo, Ca
You didn't happen to buy new tires? If you went to wide, you may be rubbing against the front inside fender well. I can't see that by replacing your down pipe you could have messed up the suspension. May want to look at you motor mounts, and possibly your exhaust hangers. The only other thing that I can think of is that you may have raised the car up on the wrong points and some how screwed up the geometry of something.
Reply
Old Sep 10, 2001 | 08:11 AM
  #3  
artguy's Avatar
WTB** Very Low Miles 94-95
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 3,298
Likes: 0
From: Tejas
wierd...I have that problem too a bit....havent been able to figure it out...only hear it...the vibration...when Im accellerating hard on a deep left turn....

Im not rubbing on anything....am thinking its a bearing issue...let me know what you find out please


thanks

j
Reply
Old Sep 19, 2001 | 03:57 AM
  #4  
TsumiKinetic's Avatar
Thread Starter
Full Member
Tenured Member: 25 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 125
Likes: 0
From: Chamblee, Ga
Well the problem has been located to be my alignment being really off. looking at the inner tread on my right front you can see where the tire was skipping. Apparently the people who did my alignment last did a really crappy job. I don't think it was related to the downpipe really it just happen to be coencidental or maybe being up on a jack caused it to shift just enough. But I'll let you know thursday after I get it all done.

Tsumi Kinetic
93 montego
Reply




All times are GMT -5. The time now is 01:39 AM.