RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   having some trouble (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/having-some-trouble-435655/)

red fd3g 06-20-05 10:33 AM

having some trouble
 
have some start up problems after a nice cruise it is hard to get the car started it cranks over and sounds like its turning over but nothing just change out my leading coil,plugs,wires i'm stump right now but than after an hour of cool down it starts up no problem

BoostFrenzy 06-20-05 10:38 AM

i've heard when compression begins to sag they are harder to start hot than cold... haven't expierenced it myself

Mahjik 06-20-05 10:48 AM

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/trouble-starting-when-car-warm-297359/

red fd3g 06-20-05 12:11 PM

it does have some low compression but it holds boost fine and vacuum is the same as it was last year

Mahjik 06-20-05 01:39 PM


Originally Posted by red fd3g
it does have some low compression but it holds boost fine and vacuum is the same as it was last year

Check the Fuel Pressure Regulator (FPR) and it's solenoid (as I mentioned in the linked thread).

jsplit 06-20-05 01:41 PM


Originally Posted by red fd3g
it does have some low compression but it holds boost fine and vacuum is the same as it was last year

Holding boost is meaningless sometimes, my compression was worthless on my last engine, I knew it was blown ( chipped seal ) but it still made power and held boost like a champ.


All times are GMT -5. The time now is 01:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands