If you all do not mind taking the time, please list your mods, PSI, and settings for your Profec B Spec II in this order:


Mods:

PSI:

SET:

GAIN:

START BOOST:

(With so many threads asking how to adjust this controller I thought it would be helpful for others, including myself.)

 

mods: t51r single, 1680 850 injectors, tiwn power, all suporting mods.

Psi: Low setting, 14psi High setting, 20psi

Set: Low setting, 37 High setting, 60

gain Low Setting, 10 High setting, 10

set gain Low setting, 120 High setting, 140

 

anyone have this on the stock twins, along with their settings?

 

Mods: T78 with all supporting mods

PSI:high setting at around 20

SET: 55

GAIN:10

Adam

 

bump

 

Stock twins, loads of other mods. Pm if you need more details

Lo

set 0%
Gain 5%
set gain

very low boost i think 8 psi

HI

set 34%
gain 24%
set gain 38

Very stable 13.2 psi

Hope this helps Scott

 

Overkill, glad you asked this. I have the same question, just never got around to asking it. I have a 3" down pipe, 3" mid pipe, 3" catback, grounding kit, greddy profec spec II boost controller, aftermarket intake w/ K&N, HKS turbo timer, 18' Fitipaldi rims all the way around with Falkin skins, Eibach 2" drop, and a few other ammenities.

PSI, I am trying to set it at 10 but all I am pulling now is 8.5 intermittently

I have my wastegate working at 37%. I am having the hardest time putting in the start boost. I have tries pushing the set button twice like it said but the option does not come up. Also, I want to start with 0 gain but when I go to put it below 5, it beeps at me.

Also, what is more acurate, the profec or the boost gauge.

I look forward to everyone else's reply.

Quid

 

bringing this back from the dead, we need more input guys!

 

so far , these are the settings for mine. Note my secondary turbos are dying.
Set: 40
Gain:38
Start boost:40

13 psi on stockers , mods in my sig.

 

the only time you use the set button is to set the desired value, regardless if you are setting your set, gain or start boost. To set your start boost, press the "mode" button until "setboost" is displayed. Turn the set button to the desired value, and then push it to confirm your setting. I'm not sure whats going on with your gain. Is it conflicting with your limit or warning somehow?

 

BTW, how many secondary turbos you have?



j/k




Great post.
I'm actualy eyeing the Profec B, so I'm educating my self here.

 

hehe, despite my typo, it's more like a negative secondary turbo

BTW, I've read all the horror stories about how people are having the darndest time setting their controller. Don't let that sway your judgementy.I have not had any of those problems so far. I've spent minimal time , and when I say minimal I have only devoted maybe 5 minutes of tune time and I'm getting consistent boost.

 

To tell you the truth I halted the buy of one just b/c I read some neg. feedback about it...

 

ill post what i HAD i have to retune it for a new ecu and dp and ic, but ill post my past settings



Mods:intake catback

PSI:10

SET:35

GAIN:5

START BOOST:i dont even remember

 

bring this back from the dead again. I know there has to be more people then this with a profec b spec II.

 

I'm just about done swapping out the twin turbo with a single. Once it is done I will need to tune it first with the stock ecu. After it is running good I will need to tune it with Apexi Power FC + Commander.

Here are my mods:

Single Turbo
SMIC intercooler
Koyo radiator
Blitz intake
Mid Pipe

Can someone give me the boost setup? Will the boost the same for stock ecu and Apexi Power FC?

Thanks,

 

From memory:

Set: 28

gain: 14

For consistent 10 psi

 

https://www.rx7club.com/showthread.p...ghlight=profec
click on the bottom doc.

 

bump action for every one

 

12 psi w/ stock ported turbos

set: 45
gain: 22
set gain: .42

 

bump

 

bump

 

Here's my setup:

Mods: Greddy CB, Bonez 3" dp, Blitz Intakes, HKS BOV, everything else stock

PSI: 9.5 (although my Defi boost gauge reads closer to 10)

SET: 25

GAIN: 5%

SET GAIN: 20

 

For my old car:

Mods: BNRs plus everything

PSI: 20-21

SET: 52

GAIN: 90

START BOOST: can't remember

 

i need some nhelp w this what u guys numbvers equivilent to.....i also dont rember seeing psi on.ly set and gain...this boost controller is very confusing try this fore a comapsrison

AKIRA---PSI: 9.5 (although my Defi boost gauge reads closer to 10)

SET: 25

GAIN: 5%

SET GAIN: 20

From memory:

Set: 28

gain: 14

For consistent 10 psi