RX7Club.com - Mazda RX7 Forum - Gauge Cluster Compatibility

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - Gauge Cluster Compatibility (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/gauge-cluster-compatibility-1015623/)

nicad2

10-23-12 09:57 AM

Gauge Cluster Compatibility

My odometer failed recently, so I'm looking for a replacement. There is a JDM cluster without the tachometer available on the forum. Does anyone know if a US tachometer could be used in a JDM cluster? If that doesn't work, I could use the JDM odometer in my US cluster if that works.

Anybody tried this? BTW, I replaced the capacitors on the odometer, but not joy :(

-Lloyd

MR_Rick

10-23-12 01:33 PM

I might have a a speedometer laying around some where. Let me see if I still do then just pay shipping.

DaleClark

10-23-12 07:37 PM

The gauge cluster components are easily swapped around - the tach is a module, the speedo/odo is a module, etc. You could swap your US tach into that JDM cluster and be good to go.

Also, read my thread on calibrating the KPH speedo to read in MPH.

Dale

nicad2

10-24-12 08:09 AM

Quote:

Originally Posted by MR_Rick (Post 11264474)

I might have a a speedometer laying around some where. Let me see if I still do then just pay shipping.

Even better! Let me know if you find it. Thanks!

nicad2

10-24-12 08:18 AM

Quote:

Originally Posted by DaleClark (Post 11264891)

Thanks Dale, this is a big help. Your calibration write-up is sweet!
https://www.rx7club.com/3rd-generati...meter-1011051/

-Lloyd

All times are GMT -5. The time now is 05:01 AM.