Firewall

Reply Subscribe

Thread Tools

Search this Thread

Dec 20, 2005 | 01:40 PM

Rufio

Thread Starter

R.I.P. FD **(

Joined: Jul 2005

Posts: 593

Likes: 0

From: Ellicott City, MD

Firewall

Im tryin to hook up my temp sensor from my temp gauge, but cant find anywhere to run it through the firewall..do i have to drill or is there somewhere i can put it through?

Dec 20, 2005 | 02:04 PM

quicksilver_rx7

Rotary Enthusiast

Joined: Feb 2005

Posts: 1,336

Likes: 0

From: Charlotte, NC

You could try the hole that the steering shaft goes through. It has a rubber boot around it to seal out the elements.

Dec 20, 2005 | 02:09 PM

DVSseven

Rotary Enthusiast

Joined: Jan 2003

Posts: 752

Likes: 0

From: panama city beach

Yeah, Do As Quicksilver Says Its The Most Feasable Way To Go About That Particular Job. Same Spot I Used To Run My Temp. Gauge...

Dec 20, 2005 | 03:09 PM

scratchjunkie

sexy no jutsu

Joined: Jun 2002

Posts: 1,578

Likes: 0

From: planet arium

or you can take off the driverside fender liner and run it through the hole there. it leads to where the foot rest is inside the car. from there you can run it to an a-pillar pretty clean.

Dec 20, 2005 | 03:49 PM

Rufio

Thread Starter

R.I.P. FD **(

Joined: Jul 2005

Posts: 593

Likes: 0

From: Ellicott City, MD

Quote:

Originally Posted by scratchjunkie

or you can take off the driverside fender liner and run it through the hole there. it leads to where the foot rest is inside the car. from there you can run it to an a-pillar pretty clean.

i tried doing this and couldnt get it through...