FD diagnostic tool and program?
 

Is there a program to check the diagnostics of the FD on my laptop?
like a FD diagnostic program and link for the FD?

i feel a lack of power and need to check it.

anyone know where i can find something like this?


thank you

FDs are OBD-1. You just count the blinks on the CEL and look it up in the manual. If you have the manuals downloaded to your laptop, now the tool is laptop-based. :)

There is a fancy diagnostic tool that plugs in and does the same tests and looks up the data, but it's not reasonably priced and it has nothing to do with a laptop.

If you have a lack of power, start with your boost level. For this you need an aftermarket boost gauge - do you have one installed?

Dave

As mentioned above, make sure you have a boost gauge first. After that, it's possible that your car does not have a Check Engine Light (CEL). If not, read the following thread:

https://www.rx7club.com/3rd-gen-archives-73/there-any-chance-read-ecu-codes-without-ecl-238994/

if you have no check engine light. the dio tool is useless. the stock ecu is very stupid. look into a power fc in the future. or borrow one and plug it in, and use that as a dio tool. if you are down on power change the plug and fuel filter. Unless you know the history of the fuel filter, change it (this is the most important thing you can do to save your engine) also when you have any odd engine quirks change the plugs. rotarys eat plugs for lunch. when in dought change them out.

hi..
thanks for the help guys.. its fixed now.. a friend of mine found out that a turbo vacuum
hose was loose... after he put that back in place the FD was back to his old self :D

ps: anyone know where i can find a turbo boost gauge black with the orange numbers?
i would like it to be like the oem gauges.

thank you again