3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Engine problem? Help please!

Thread Tools
 
Search this Thread
 
Old Jan 8, 2006 | 10:48 PM
  #1  
7heBeas7's Avatar
Thread Starter
Junior Member
Tenured Member: 20 Years
 
Joined: Jul 2004
Posts: 41
Likes: 0
From: sayreville, NJ
Engine problem? Help please!

Hey, i recently took the car out for a ride and gunned it from a start. Everything seemed fine except at about 6500 rpm or so it felt like the car wasn't making any power. You can feel the 2nd turbo kick in then it kinda flatlines and doesn't feel like it's accelerating anymore. Only mods I have done is pettit racing intake and racing beat exhaust. I have a boost gauge as well, but I didn't look if it was still making 10 psi at that point, I completely forgot to look. Any diagnosis?
Reply
Old Jan 9, 2006 | 12:30 AM
  #2  
RotaryResurrection's Avatar
Lives on the Forum
Tenured Member: 20 Years
Liked
iTrader: (8)
 
Joined: Oct 2003
Posts: 11,576
Likes: 27
From: Morristown, TN (east of Knoxville)
ON a car with a stock cat it's normal to bleed off a little boost after 6000rpm, which will show up as a bit of power loss from the strong pull you get at the 4500 transition.
Reply
Old Jan 9, 2006 | 08:44 AM
  #3  
RotaryX's Avatar
ROTARY AUCTIONS
Tenured Member 05 Years
 
Joined: Jan 2005
Posts: 314
Likes: 0
From: Texas
[QUOTE=7heBeas7]Hey, i recently took the car out for a ride and gunned it from a start. QUOTE]

Please tell me you did just start it, and then floored it. You did let it warm up first, right?


Reply
Old Jan 9, 2006 | 12:35 PM
  #4  
7heBeas7's Avatar
Thread Starter
Junior Member
Tenured Member: 20 Years
 
Joined: Jul 2004
Posts: 41
Likes: 0
From: sayreville, NJ
Oh, of course I let it warm up, for at least 5 min. I would never do that to my car lol.
Reply
Old Jan 9, 2006 | 01:00 PM
  #5  
DaveW's Avatar
Racecar - Formula 2000
Tenured Member: 20 Years
 
Joined: Sep 2002
Posts: 4,027
Likes: 366
From: Bath, OH
Originally Posted by 7heBeas7
Hey, i recently took the car out for a ride and gunned it from a start. Everything seemed fine except at about 6500 rpm or so it felt like the car wasn't making any power. You can feel the 2nd turbo kick in then it kinda flatlines and doesn't feel like it's accelerating anymore. Only mods I have done is pettit racing intake and racing beat exhaust. I have a boost gauge as well, but I didn't look if it was still making 10 psi at that point, I completely forgot to look. Any diagnosis?
I had that problem for a long time when I still had my pre-cat. In addition, I found that one of the hoses had popped off the pressure tank, delaying actuation of the second turbo. I think the pressure tank hose was the main culprit. I am not completely sure, however, since I installed a DP and did the hose job (finding the detached hose) at the same time.
Reply
Old Jan 9, 2006 | 02:11 PM
  #6  
7heBeas7's Avatar
Thread Starter
Junior Member
Tenured Member: 20 Years
 
Joined: Jul 2004
Posts: 41
Likes: 0
From: sayreville, NJ
Oh ok. I dont plan on getting a DP anytime soon, but I'm curious to see if one of the hoses popped off the pressure tank. Where exactly is the pressure tank? Anyone have a service manual in pdf form?
Reply
Old Jan 9, 2006 | 02:28 PM
  #7  
DaveW's Avatar
Racecar - Formula 2000
Tenured Member: 20 Years
 
Joined: Sep 2002
Posts: 4,027
Likes: 366
From: Bath, OH
Originally Posted by 7heBeas7
Oh ok. I dont plan on getting a DP anytime soon, but I'm curious to see if one of the hoses popped off the pressure tank. Where exactly is the pressure tank? Anyone have a service manual in pdf form?
It's the small black plastic tank just in front of the UIM. There are two hoses that attach to its left end. One end of the tank is held by one of the bolts that also locates the pipe from the turbos to the IC.

EDIT: There are some links to service manuals in the stickies...

Last edited by DaveW; Jan 9, 2006 at 02:36 PM.
Reply
Old Jan 9, 2006 | 02:29 PM
  #8  
trini's Avatar
Full Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Jun 2005
Posts: 178
Likes: 0
From: clermont fl.
its a black lil canister rite on top the engine. cant miss it
Reply
Old Jan 9, 2006 | 02:54 PM
  #9  
7heBeas7's Avatar
Thread Starter
Junior Member
Tenured Member: 20 Years
 
Joined: Jul 2004
Posts: 41
Likes: 0
From: sayreville, NJ
Ok thanks a lot guys. I took a look at it and the one closest to me was completely on there, the one further back was still on there but looked like it started to come off. I pulled on it and it seemed to come off relatively easy, and released some air. I put it back on and zipped tied it and it feels a lot tighter on there. Even though I can pull it off, it's a lot harder than it was before.
Reply
Old Jan 12, 2006 | 05:52 PM
  #10  
7heBeas7's Avatar
Thread Starter
Junior Member
Tenured Member: 20 Years
 
Joined: Jul 2004
Posts: 41
Likes: 0
From: sayreville, NJ
Here's another thing i noticed. Most of the time i shut my car off, it makes like a pop sound from the exhaust like a last sec backfire. Should i worry about this?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
Wicked93gs
New Member RX-7 Technical
0
Aug 17, 2015 12:14 PM




All times are GMT -5. The time now is 06:31 AM.