|
E-break light
I just replaced my clutch with a 6 puck not to long ago and while replacing it i dident push the fork in on thepressure plate. i kept pumping the clutch peddle til the slave cylinder shot fluid out =/... i put the fork on right and bled slave cyl. What do i do now?!? do i have to bleed the hole brake system to get rid of that light?!?
|
Check here for some suggestions:
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/parking-brake-light-stays-how-tighten-handle-39072/ |
Check you break fluid level. It dosent take much for the fluid to gown before the senson is activated.
|
sorry cant read.
|
my bad i was half asleep when i wrote the post =/ i was just wondering what triggers the e-break light?!?
|
fluid level, if it's low it sets off the light. your brake and clutch fluid are the same resovour
|
Originally Posted by rx7plus8
(Post 7020328)
my bad i was half asleep when i wrote the post =/ i was just wondering what triggers the e-break light?!?
|
brake
|
| All times are GMT -5. The time now is 10:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands