Dyno logs anyone.. from stock - mild - wild?
 

I was wondering if anyone has dyno'd there car with every modification they have done..

What does a stock 255hp FD make at the wheels?
Then bolt on a 3" zorst?
Cold air intake?
Intercooler?
1.0bar boost?

Where to from there? single turbo kit?

A stock FD pushes about:

239 bhp @ 6500 RPM
216.8 lb-ft @ 5000 RPM

Thats at the fly isn't it?

no 255hp is at the flywheel.

damn, bugger all drivetrain loss then.

that's one healthy FD, thought it's more like 215-225 stock.

A typical stock FD does NOT make 239 at the wheels.

Here's my dyno with just downpipe and cat-back. I am only getting 7 psi above 6k rpm, so I should be making more power.

https://www.rx7club.com/forum/attach...&postid=966597

I guess I should memorize some new numbers then! :D

argh...youll need an ecu to run that kind of boost.


j

artguy: are you talking about 1.0bar?

225 rwhp stock? That must be a healthy stock FD.

I had a flawless white 94 touring (~35,000 miles) that "only" dynoed at 230rwhp with a downpipe - of course I did have 18" SSR Integrals back then.

Too bad that car got stolen; hope those thieves burn in hell for all for eternity

Not that I'm vengeful or anything...:uzi:

Check out my latest FD:

https://www.rx7club.com/forum/showth...hreadid=126392

stock hp
 

Back when I first bought my car, and had a stock motor, and no mods etc, I dyno'd 238.8 HP, and 226 Ft lbs of torque. I haven't dynoed since the the port job, intake, DP, Catback, Greddy IC, and IC sprayers. I would be curious to see what anyone has dynoed with my above listed mods.