so the probes and amplifier are figured out, whats a good compatible gauge to complete the setup.
|
|
Originally Posted by staticguitar313
(Post 10014483)
so the probes and amplifier are figured out, whats a good compatible gauge to complete the setup.
Anything digital? |
SPA gauges = gangsta shit.
Originally Posted by Carpenter
(Post 10061163)
Anyone?
Anything digital? http://www.spatechnique.com/product_...ils.cfm?id=385 |
Interesting thread... will need later
|
http://www.exhaustgas.com/ProductDet...0362.91&RepID=
With this dual channel signal converter will I be able to log AND run a gauge? |
I recently acquired the Spa Technique gauge and it looks to be a nice piece. It also comes with the probes, which look to be good quality as well. I am not exactly sure which "brand" they use, but I will try to get a picture of them. I should be completing my setup very soon on 99 spec twins with PFC datalogging. I am also doing an aquamist pre-turbo water injection setup if anyone cares to know. Remember... the spa gauges only go up to 1768 F. I don't plan on tuning above 1650F.. for now :).
Ken |
ken, I use the SPA technique dual egt gauge and love it. I've had it in the car for about 3 years. I dont know how much drag racing you plan on doing, but I can tell you that after my third trip to the drag strip and launching with the 2 step, the egt probe on the front manifold runner broke off and wrapped itself around the turbine wheel of my turbo. (you think apex seals damage turbine wheels, you aint seen nothing) I have since went with the probes from exhaustgas.com I havent launched the car on a 2 step with these new probes but the rep at exhaustgas.com assured me that these will hold up. he says he has had many ppl complain of the issue i had with the SPA probes. just something to think about.
the SPA guage is great tho. i love the peak hold and playback functions. best Guage investment I've made besides my FJO wideband. |
"exhaustgas.com "
that's who i decided to go w also... they appear to be very professional and custom made the probes to my fit specs. hc |
Originally Posted by Howard Coleman CPR
(Post 10112828)
"exhaustgas.com "
that's who i decided to go w also... they appear to be very professional and custom made the probes to my fit specs. hc |
post 152 shows my probes... i don't remember whose amp i am running but it is working fine after a number of years.
i note that the same co that i settled on for the probes now offers an amp for approx $74. given their client list and my dealings w them i would recommend their offering. as to how they are working... fine. only a few hundred miles and 10 pulls on the dyno so far but i should be back on the dyno tomorrow. sample rate is 300 Ms. howard |
i am trying to figure out the poly to log this in data loggit. anybody?
|
you shouldn't need a poly. It should be a linear signal.
|
what do you guys think of this kit from exhaust gas?
http://www.ebay.com/itm/110760615684...ht_2377wt_1396 includes everything and the fast "stinger" thermocouples. Good deal? |
Hey just thinking about the same kit above... Is it any good then?
|
All times are GMT -5. The time now is 11:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands