DEpin Power FC for stock unmodified harness on stock FD
So instead of cutting the harness of the egr's split air and aws
i simply just followed the dale clark faq guide and cut the appropriate pins off the ecu. I triple checked to make sure its the right ones. I figure no one would ever need those if i sell it later lol And it makes life easier https://cimg0.ibsrv.net/gimg/www.rx7...035458e001.jpg on a side note. i got curious and opened it up to see hows the condition and came across this upper left plug anyone know what it is for ? https://cimg1.ibsrv.net/gimg/www.rx7...7ce9439025.jpg |
Another option is to buy the splice in harness extender from banzai, then you can just simple snip the wires you don't need, and you also have room for add-ons such as gauge and what not, again without needing to modify the stock harness at all. Yes this is the more Gucci option, but I don't really spare any expense when it comes to my fd.
|
The only problem with removing the pins is that Apexi will not service it if it ever needs to be repaired. |
Originally Posted by Banzai-Racing
(Post 12290991)
The only problem with removing the pins is that Apexi will not service it if it ever needs to be repaired. do so at your own risk thanks banzai |
Backing out the pins from the harness isn't hard and it's easily reversible. Also, if you goof up and back out the wrong pin you can just pop the pin back and do the correct one.
Dale |
All times are GMT -5. The time now is 06:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands