Fmic
 

For people with a FMIC, what size is the core? I am able to get IC cores for a good price, and want to fabricate my own.

Does anyone have any pics of the install? Thanks!

I got a hybrid fmic 24x12x3 core only, ent to end is 30", wide, fits perfectly.
I don't have any installation pix but i have few ic pix but forum is not letting me upload right now.

You're getting the pipes done custom or you ordering them?
I'm not happy with my custom pipeing I'm looking to find something better..

do a v-mount :D then when you finish it let me know what you used and a step by step instruction

Do you have any pics of what it looks like sitting on the car?

No, sorry.

24 x 10.5 x 3.0

I'd love to do a V-Mount. All I need are the dimensions and where I can buy the IC duct.

I was thinking that the saab, or volvo intercooler might be a purty good alternative. And have heard of a couple people who have used them in their rx7. Depending on what version you get the roughly measure about 17.5 H X 18.5 W -and have a depth of about 2 1/2 in. The piping might be a little bit tricky, but I'm sure you would still come out on top since they generally sell for about $50. But, all of this information is just my own speculations.

woops but than again, your looking for the FMIC

Thanks!

Now I'm looking to do this V-Mount.
http://www.rx7store.net/index.asp?Pa...ROD&ProdID=829 . I'll post pics of the progress.

There's no duct per se on a V-mount. Just some gap sealing.

I have brand new cores that could be used, $650 shipped!

origonally for the EVO8 but can be used for a custom rx7 job.

http://www.turboxs.com/_images/UTEC/evopic/FMIC1sm.jpg

Specs: 3.5x11.75x24

https://www.rx7club.com/showthread.p...apexi+gtr+core

here ya go!!!

paul

Thanks, but I get'em for around $300 with custom end-tanks.

Nice, Paul.. This is what I've been looking for! Thanks!

noooooooooooooo problem!!!

:eek: Where are you getting them for that price??

Justus

are yours for 300$ tube and fin or bar and plate?

I would consider buying them for 300$ for my shop if they are bar and plate cause thats cheaper than i get them for :D