Cj motorsports Dual Bosch 044 Issues
2 Attachment(s)
Installing the CJ Motorsports Dual Bosch 044 hanger what a pita. The first install was done with the hardlines below but this proved to ve impossible given the size constraints. So version 2 with some submersible fuel line was made.
The problem comes with the level sender it seems with te two boschs that there is no way to make the unit fit. Has anyone with this part successfully used the stock level sender or has anyone used an aftermarket sender with success? |
You have to install the fuel level sensor on the hanger when it is inside the tank.
Feed sending unit into the tank then place hanger inside the tank with the lines disconnected. Install sending unit (dont drop screw) then install lines and finish the rest of the installation. |
Originally Posted by RENESISFD
(Post 11417826)
You have to install the fuel level sensor on the hanger when it is inside the tank.
Feed sending unit into the tank then place hanger inside the tank with the lines disconnected. Install sending unit (dont drop screw) then install lines and finish the rest of the installation. |
All times are GMT -5. The time now is 07:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands