Cj motorsports Dual Bosch 044 Issues
03-25-13, 01:19 PM
#1
Derwin
Thread Starter
iTrader: (2)
Join Date: Apr 2005
Location: MTL, QC
Posts: 2,888
Likes: 0
Received 0 Likes
on
0 Posts
Cj motorsports Dual Bosch 044 Issues
Installing the CJ Motorsports Dual Bosch 044 hanger what a pita. The first install was done with the hardlines below but this proved to ve impossible given the size constraints. So version 2 with some submersible fuel line was made.
The problem comes with the level sender it seems with te two boschs that there is no way to make the unit fit. Has anyone with this part successfully used the stock level sender or has anyone used an aftermarket sender with success?
The problem comes with the level sender it seems with te two boschs that there is no way to make the unit fit. Has anyone with this part successfully used the stock level sender or has anyone used an aftermarket sender with success?
03-25-13, 05:34 PM
#2
Wastegate John
iTrader: (13)
Join Date: Feb 2008
Location: Long Island NY 11746
Posts: 2,979
Likes: 0
Received 9 Likes
on
9 Posts
You have to install the fuel level sensor on the hanger when it is inside the tank.
Feed sending unit into the tank then place hanger inside the tank with the lines disconnected. Install sending unit (dont drop screw) then install lines and finish the rest of the installation.
Feed sending unit into the tank then place hanger inside the tank with the lines disconnected. Install sending unit (dont drop screw) then install lines and finish the rest of the installation.
03-25-13, 07:47 PM
#3
Derwin
Thread Starter
iTrader: (2)
Join Date: Apr 2005
Location: MTL, QC
Posts: 2,888
Likes: 0
Received 0 Likes
on
0 Posts
You have to install the fuel level sensor on the hanger when it is inside the tank.
Feed sending unit into the tank then place hanger inside the tank with the lines disconnected. Install sending unit (dont drop screw) then install lines and finish the rest of the installation.
Feed sending unit into the tank then place hanger inside the tank with the lines disconnected. Install sending unit (dont drop screw) then install lines and finish the rest of the installation.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
