central locking
Somebody can explain me how I can set up this central locking?
My door: http://home.tiscali.de/bigjoker163///tuer.JPG My central locking: http://home.tiscali.de/bigjoker163///verr.JPG THX |
those are for conventianal rod door locks. FD uses a wire cable.
What are you try'n to do? I had a set of those i used once as an automatic door opener once :) they can be used but would be a big pain |
how can i to modify this?
|
Fragen fur dich: warum brauchtest du dieses zentraller... umm... word for locking? (end of attempt to bust out rusty German!) Does your passenger side door not unlock when you unlock the driver's side door? It is supposed to, at least on the USA cars.
|
Like spurvo said, you probably have a power lock on the passenger side. Are you adding keyless entry as well?
I believe NewbernD posted a pic, long ago, on how to install that style actuator. He attached the actuator's rod to the plastic lock lever itself, parallel to the cable. Several who had attached the actuator rod to the cable itself have broken the cable. Try a search for this (it's probably in the interior/exterior/audio section), and see what you dig up. If you cannot find it, I'll try to find the pic. |
yeah, there is a plastic tab that should hang down (if im remembering this correctly) and you can drill a hole in it and attach the actuator bar which will pull the cable.
the passenger door should already have an automatic one already installed from the factory (at least US ones do).... if it does then you now have 1 EXTRA actuator. put it in the trunk to pop the trunk :wink: ... i have auto doors & trunk on both my 7's |
yes, but the original broke in an accident, for that I bought one of the cheap mx5.
I thank if you get to meet the pic of the assembly, as you see my English is not very good |
ok, already found the pic, I am already to set up in the car, only I need to know where find these threads in the car doors: remote control, alarm
http://home.tiscali.de/bigjoker163///control.JPG |
Originally posted by bigpro yes, but the original broke in an accident, for that I bought one of the cheap mx5. I thank if you get to meet the pic of the assembly, as you see my English is not very good im not sure i understand what you meant about the mx5 parts you bought... please feel free to respond in german... i have a german roomate who can translate. if it helps i can have him respond in german as well if your english is a little rusty. -heath |
OK, ich habe die zentralverriegelung für den MX5 gekauft. Ist nicht für die alarmanlage, nur zentralverriegelung auf beide türen. Ich bitte um die fotos
|
Here is how I did mine. I had a very similar actuator kit to the one in the pic above. It is very important that you attach it to the plastic piece that the cable attaches to and not the cable itself. I've heard of numerous people who have snapped thier cable by connecting directly to it.
http://24.33.16.194:9001/images/forum/keylessentry.jpg And please no comments about how crappy and pieced together my job looks. I was at my mom's house and wroking with a lack of tools and supplies so I made it work with what I had. I was planning on going back and doing a better job later but it has been two months now and the keyless entry still works flawlessly so I think I just gonna leave it alone until something breaks or comes loose. |
also here's a thread that I found when doing mine. It came in very helpful.
https://www.rx7club.com/showthread.p...ight=keyless+e |
thank you, don't I get to set up in the door on the right side, don't I have space, does nobody have pics of the door on the right side?
|
Ok, I´m already ready.
Only lack to set up the electronics, can you help me? where are the cables in the car, and which?:confused: |
I'm not sure about the ones from germany. But the ones here in the US already have an actuator on the passenger side (which is on the right side of the car over here). So that is why we don't have any pics of the door on the right side. It should be just the same only a mirror image. Also if when you lock your driver's side the passenger side automatically locks then your passenger side already has an actuator and there is no need to install one there.
I can't fine my sheet that tells the wire locations of all of the different wires that you need to splice into to hook up the alarm. I'll try to find it and post it for you. |
YEAR: 1993 MAKE: Mazda MODEL: RX-7 STYLE:
| ITEM | WIRE COLOR |POL | WIRE LOCATION | | 12V |black/green | + |ignition harness | | STARTER |black/blue | + |ignition harness | | IGNITION |black/white | + |ignition harness | | SECOND IGNITION |black/yellow | + |ignition harness | | POWER LOCK |add actuator | |in drivers door | | POWER UNLOCK |add actuator | |in drivers door | | PARKING LIGHTS + |red/black | |fuse box | | PARKING LIGHTS - |gray | |steering column | | HEADLIGHTS |white/blue *3 | - |steering column | | DOOR TRIGGER |blue/white | - |passenger kick panel*2 | | TRUNK/HATCH PIN |gray | - |switch or cpu #2 *5 | | HOOD PIN |brown/yellow | - |switch or cpu #2 *5 | | TRUNK/HATCH RELEASE | | | | | FACTORY ALARM ARM |dk.green/black | - |drivers kick panel | |FACTORY ALARM DISARM |lt.green/black *4 | - |drivers kick panel | | TACHOMETER |yellow/blue | |leading ignition coil*1 | | BRAKE WIRE |green | + |at brake switch | | HORN TRIGGER |green/orange | - |column or cpu #2 *5 | | WIPERS |blue/yellow | + |steering column | | LF WINDOW UP/DOWN |red - green | A |in drivers door | | RF WINDOW UP/DOWN |blk/wht - blk/yel | A |in drivers door or dkp | NOTES: *1 also found coming through the firewall above brake. Set module to the six(6) cylinder setting. *2 Can also be found in the drivers kick panel above the relays. *3 To operate the pop-up motors provide 12v to the white/green, also at the steering column. *4 Has also been found to be a pale yellow/red on some models. *5 CPU #2 is located in the left kick panel. |
All times are GMT -5. The time now is 07:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands