cause of knock
#1
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: Montreal, PQ
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
cause of knock
What would cause my knock readings to all ob a sudden increase by about 10. when I first plugged in PFC I was getting neer higher than 60, now with the intercooler, adn a little while later I am getting mid 70's around 3k RPM. I can;t see how an intercooelr could do this.
What could cause and increase like this?
What could cause and increase like this?
#3
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: Montreal, PQ
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
no, I am in Georgia with 93 octane, air/fuel ratio is hard to tell on patial throttle around there becasue of the air pump. on full throttle I am like .93 so plenty of fuel.
#5
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: Montreal, PQ
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
new filtre, but never cleaned the injectors, I am just kidna nervous to drive it. it has had iinjectro treament by the previous owner, but not in 15k miles. I'll am going to ttry it though.
Thread
Thread Starter
Forum
Replies
Last Post
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM