RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   boost question (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/boost-question-769156/)

fcapo Jul 6, 2008 08:35 AM

boost question
 
Can anyone tell me why is it on my first turbo I get 4-5 lbs of boost that only last
a very sort time and then it comes back on and off but when it does you here a weird whistling sound but the second turbo kiks in with a force so if inyone here has some insites please pm me on just post with answers.

ps. when do you know if the turbo is gone?


Thanks fcapo :wallbash:

rexhvn Jul 6, 2008 09:04 AM

Are you able to give us a boost pattern? Do a third gear pull and let us know what figures you get! This will give us more of an idea if your issue.

Check this out too... this should help - http://fd3s.net/boost_problems.html

Dennis,

fendamonky Jul 6, 2008 09:18 AM


Originally Posted by fcapo (Post 8349398)
Can anyone tell me why is it on my first turbo I get 4-5 lbs of boost that only last
a very sort time and then it comes back on and off but when it does you here a weird whistling sound but the second turbo kiks in with a force so if inyone here has some insites please pm me on just post with answers.

ps. when do you know if the turbo is gone?


Thanks fcapo :wallbash:

Weird whistling sound? As in boost leak? If you're only making 4-5 pounds of boost than the secondary turbo shouldn't be coming online. Have you checked for any loose/burst hoses in the rats nest? Check your intake pipes to make sure the bolts/screws holding them to the turbo's have not spun loose, check the IC piping for any leaks or bad coupler seals.

Is this a sudden problem, or has it been a gradual build-up?

Mahjik Jul 6, 2008 09:30 AM

Did you work through the link I posted in your last thread?

https://www.rx7club.com/showthread.php?p=8349474

fcapo Jul 6, 2008 01:07 PM


Originally Posted by rexhvn (Post 8349430)
Are you able to give us a boost pattern? Do a third gear pull and let us know what figures you get! This will give us more of an idea if your issue.

Check this out too... this should help - http://fd3s.net/boost_problems.html

Dennis,

2nd and third gear I get any where from .83 to .90 on my apexi commander and boost gauge but you can here the first turbo sort of comming on and off.But my air temp is in the 90 on my apexi commander also,it has been quite warm these past few day like in the 90.seems to run a bit better when it is cooler out.


Thanks for everyones responce

fcapo

fendamonky Jul 6, 2008 01:39 PM


Originally Posted by fcapo (Post 8349871)
my air temp is in the 90 on my apexi commander also,it has been quite warm these past few day like in the 90.seems to run a bit better when it is cooler out.

Stop driving your car, NOW!!!!

You've either got a very messed up sensor, or you have a HUGE cooling problem.

When using an intercooler only (no A/I) the optimum air temps would be a couple degree's above ambient. 30-40 degrees celcius is a good temp range in the summer, 50+ you want to be leery, at 90 you are batshit insane to be driving under boost!!!

No way is Canada hot enough to validate those air temps...

fcapo Jul 6, 2008 03:00 PM

boost question
 

Originally Posted by fendamonky (Post 8349921)
Stop driving your car, NOW!!!!

You've either got a very messed up sensor, or you have a HUGE cooling problem.

When using an intercooler only (no A/I) the optimum air temps would be a couple degree's above ambient. 30-40 degrees celcius is a good temp range in the summer, 50+ you want to be leery, at 90 you are batshit insane to be driving under boost!!!

No way is Canada hot enough to validate those air temps...

I get those temp 30-50 degrees at crusing speeds it's when I run it real hard
in each gear I get those temps.

thanks fcapo

fendamonky Jul 6, 2008 03:07 PM


Originally Posted by fcapo (Post 8350122)
I get those temp 30-50 degrees at crusing speeds it's when I run it real hard
in each gear I get those temps.

thanks fcapo

Cruising should stay in low-mid 30's.. The *worst* I've ever seen was 70* Celsius and that was after about 5 miles of constant 16psi while racing an EVO. This was with a Beefy SMIC (GReddy). Seeing temps that high (on a relatively hot day) convinced me to get Water Injection, and plan on a V-mount in the fall.


My suggestion would be to take your car to a known Rotary Specialist and have them check it out. That and read a lot more of the technical articles on this forum.


All times are GMT -5. The time now is 09:13 AM.


© 2026 MH Sub I, LLC dba Internet Brands