3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Boost Question!

Thread Tools
 
Search this Thread
 
Old Mar 15, 2002 | 11:41 PM
  #1  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 38
Likes: 0
From: IN
Boost Question!

Hi guys, is it save to have 13 psi on stock tiwns with ecu,downpipe,intake and exhaust?

Last edited by LabSquare; Mar 15, 2002 at 11:53 PM.
Reply
Old Mar 16, 2002 | 04:00 AM
  #2  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 38
Likes: 0
From: IN
bump!help!
Reply
Old Mar 16, 2002 | 08:54 AM
  #3  
billyrohm's Avatar
Man who sold his 7
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 308
Likes: 0
From: Mechanicville, NY
It should be safe as long as you have enough fuel
Reply
Old Mar 16, 2002 | 10:12 AM
  #4  
Fd3BOOST's Avatar
Recovering Milkaholic
iTrader: (7)
 
Joined: Jan 2002
Posts: 8,206
Likes: 0
From: Budds Creek, Maryland
Yea your probably ok but if you start spiking then go get A boost controller and ecu.Its cheaper than an engine
Reply
Old Mar 16, 2002 | 03:37 PM
  #5  
Bucrx7's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 724
Likes: 0
From: Massachusetts
Yes it is safe but I wouldn't run 13 psi unless it's cold out. In the summer time I would wait for an upgraded IC because the stock one is inefficient.
Reply
Old Mar 16, 2002 | 05:24 PM
  #6  
RecKleSs's Avatar
Adrenaline
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 1,261
Likes: 0
From: Long Island, NY
My duty cycle in my FD hits 100% when I hit 13psi, which is extremely bad. To be on the safe side upgrade your fuel system and ic if you plan on consistently running 13psi or higher.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM




All times are GMT -5. The time now is 04:53 AM.