![]() |
BNR Stage 3 hit the dyno today.
I made 374 RWHP at 16 psi today, and see what kind of times I can hit at NOPI tomorrow. My map was pretty rich, and think I can squeeze a little more power with some more tuning. I didn't have time to mess with my map much, due to having to load up the trailor and stuff tonight. I will be running ET Streets, and should be fun. Just hope my diff holds together. Wish me luck.
|
Good luck at the strip and be sure you post your dyno run and time slips when you get back....:)
|
I am very jealous, buena suerte manana. Josh
|
Thats good stuff man. Good luck at the track tomorrow. 374 should be good for what, high elevens, low twelves?
|
I am hoping for maybe mid 11's. I will let you guys know. I am going to launch like a mad man, to get my 60 foot down.
|
Nice numbers, let us know how your numbers turn out at the track! What are your other mods???
|
Originally posted by lerch32 I am hoping for maybe mid 11's. I will let you guys know. I am going to launch like a mad man, to get my 60 foot down. Wish I could be down on the beach. :( |
Don't launch "like a mad man". Try a 3000 rpm launch and see what happens. Tom
|
great numbers.
|
Originally posted by lerch32 I am hoping for maybe mid 11's. I will let you guys know. I am going to launch like a mad man, to get my 60 foot down. hey lerch 32, are you jim. cym r1. if so are you running seq or non-seq....i know you had a lot of seq issues when i was down there in va beach. if not good luck anyways....we want video. |
How about them stage 3s, they leaking oil on you?
|
nice nice numbers....can you post your sheet please????
j be sharp...youll hit mid elevens...keep yer tire pressure low and good luck. |
As far as oil leaking, Bryan had sent me the new bolts, but I have not installed them yet. I have very little oil burn as it is now. Not sure if I am even going to change them. No I am not Jim. I will post sheet, and times when I get back Sunday night. I am off to the races, wish me luck guys.
|
Good Luck. =)
|
ouch...id run those bolts......if you run them without and the seals go...they are gone.....they will hold pressure for the short term...but you may find that the leaking will come soon enuff. beware....once they leak...they leak....resttrictor bolts or not.
j j |
Nice #s please post dyno sheet Im thinking of going with the 2s. And are you seq or non-seq?
Good luck at the track.....:) |
nice numbers
who tuned it? |
Good luck and let us know how many pieces you break the diff into. :)
I've seen people break the diff with 270rwhp on slicks. If the diff holds up I'm gonna say you'll run an 11.7 |
With ET Streets and a good run thats enough for a mid-low 11 sec. pass
|
The ET Streets are easier on the diff than drag radials by far, wrinkle wall, and no wheel hop. Go get 'em
|
Originally posted by 93 R1 With ET Streets and a good run thats enough for a mid-low 11 sec. pass who tuned the car? |
The car has not been tuned. I am using a map from the yahoo group. I am hoping to find someone who can really tune my car. I think I could get 400 rwhp out of her. My best time this weekend was 12.05 with 1.7 60 foot, and missing third. After that the heat really got to the turbos, damn stock manifold. I think I would have had a low 11 second pass if I didn't miss third. I will post the slip, and dyno sheet after I fix the camera that my girlfriend dropped this weekend. I really need to get the car tuned, it is pretty rich, and my timing needs work, but no one around me knows how to tune a rotary. That is why I used a map fron the group.
|
If anyone can help get the car tuned, please let me know. It's has alot of potential.
|
What was your trap speed?
|
Originally posted by lerch32 My best time this weekend was 12.05 with 1.7 60 foot, and missing third. What RPM did you launch ?? |
with et streets i launch at 6500ish
|
nice numbers - there's more power in them - 17 psi with good tuning will yield 400 rwhp - at 16 psi your traps should be around 120-123 - maybe lower in the summer heat though.
|
Originally posted by kwikrx7 nice numbers - there's more power in them - 17 psi with good tuning will yield 400 rwhp - at 16 psi your |
Take a trip somewhere and get that tuned. Where in va beach do you live..im at virginia beach for only 2 more days until college! mmmmm college.
|
Originally posted by lerch32 If anyone can help get the car tuned, please let me know. It's has alot of potential. |
I wanted to break in the engine first.
|
what was your trap speed?
|
118 after missing third.
|
What did you launch at 5000rpm?
|
I was trying all sort of different launchs, and don't remember what that one was. I did launch once at 7500, and had a 1.5 60 foot. I think once I get my launchs down, and not missing third I should hit some low 11's. I hope.
|
is that on the stock diff and axels?
|
Yup
|
Dang stock diff. I thought launching at 5500rpm was dangerous, but 7500!!!
|
you are lucky, i launched at 7500 once and the car didn't move an inch, the gears shot out of the diff casing :D . the only difference is that i had drag radials.
|
I have launched at 7500 many times.
|
I have launched at 7500 many times. |
I am running a ACT street strip.
|
then you are probably slipping a bit when you drop it.
|
I will be putting in a TII rear this week.
|
All times are GMT -5. The time now is 04:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands